Tag Archives: toolstation

Tuesday 26th August 2014 – WHAT A FLAMING SHAMBLES!

Absolutely!

This afternoon at Gerzat we had about 2.5 hours to record our radio programmes for Radio Arverne before I needed to leave to catch my train. 6 programmes this week, which meant that we would need about 2 hours or so.

Normally we would arrive there at about 14:00 and so our 2 hours would take us up to 16:00 leaving plenty of time for my train at Riom at 17:06. However, thinge never normally go according to plan and so we set out earlier, arriving at 13:45. I’d also had some kind of premonition and so on our way down to Gerzat we had stopped at the railway station at Riom so that I could pick up my ticket and so miss the rush-hour rush.

And I’m glad that we did, too.

When we arrived at the radio station, the junior engineer was outside smoking a cigarette. And inside at the office, the secretary told us that it was indeed the junior engineer who would be recording us. “Ahh well”, we breathed a sigh of relief. “He’ll be here in a minute”. That was famous last words, wasn’t it?

By 14:10 I was starting to become restless so I told the secretary how pressed we were for time. She phoned him up and then told us that he would be here in a minute.

By 14:25 I told the secretary that to call him again and tell him that at 16:30 we were walking out, regardless of wherever we were in the programmes.

Anyway, he turned up at just before 14:30 and by 14:34 we were ready to go. At least, some of us were. The engineer had a friend in the recording booth with him and was too busy chatting to see our cues. Every cue was missed and at one stage we overran because he had failed to give us our time signal.

As a result, at 16:30 precisely, we upped and went, even though the final programme was only half-way recorded. How they intend to finish it, I really don’t know, but ask me if I care.

For a change, everything went well-according to plan at Marcillat with Radio Tartasse. It’s usually there that we have our major issues but today, everything was ready and passed off without a hitch, even if I did forget to take my memory stick with me (good job I had the laptop in Caliburn).

It was nice to see Liz and Terry again after all these weeks and to talk to them about their holiday, and Terry gave me some really good news. Apparently Toolstation, Screwfix’s big rival, has now opened for business in France. They don’t stock the range of goods that Screwfix stocks, but from what I have seen, their prices for what they do carry are cheaper. I’ll be interested to see how their prices compare to Brico Depot. Anyway, it’s nice to see one of the major UK D-I-Y suppliers taking the initiative in France.

local train riom chatel guyon lyon perrache puy de dome franceAt Riom Station, my train came in on time. It’s been upgraded from the original rattletrap to something more modern, but it was jam-packed with people. There wasn’t a spare seat on the train. I’ve no idea what was happening there.

And not only was it on time leaving Riom, it was actually on time arriving at Lyon Part-Dieu too. And I felt so much better when we arrived too – leaving all of this mess behind.

TGV lyon part dieu france
However, being on time at Lyon was more than can be said for the TGV. It was 10 minuts late pulling into the station. And the fact that I’m passing comment on it shows you just how unusual this is. Normally, the trains run bang to time.

And while the luggage space was comparatively full, there were quite a few empty seats on the train. Not like last year when we were crammed in like sardines.

So by the time we got to Phoe … errr … Lille we were 27 minutes late, 3 minutes short of the magic 30 minutes that gives me a 25% return on my ticket. And now I’m in my hotel – a 10 minute walk from the TGV station. I’ve had a hot shower and I’m off to bed.

Friday 16th December 2011 – JULIE’S MUM …

loaded caliburn ford transit… said to me that I could fit a few extra things in Caliburn, because her son in law (Rob) had told her that it would be quite empty coming back.

Well, absolutely. As you can see.

Shall we run through all of the stuff that isn’t there? Like no scaffolding for a start? No rolls of insulation?

As Clare said when she saw the photograph “it’s a good job that I forgot to ask you about the three-piece suite”. Plenty of room for that.

I left my hotel fairly early and did another trip around the supermarkets and tool supply places like Screwfix and Toolstation, all for stuff that I had forgotten.

Another trip down to my storage box and collect the last of the stuff that I had ordered. And my luck was in again – I managed to source another Ford Transit wheel for Caliburn’s winter tyres.

Northampton was next, and Michael very kindly sorted out a 98-litre immersion heater for me from his plumbing supplies place. This is for the solar hot water at home.

Rosemary had asked me to call at a place in London for 7 rolls of this space-blanket roof insulation, and then back out to Luton for Rob and Julie’s stuff.

No wonder I was exhausted.

I made it down to Pompey – Portsmouth – with time to spare – which surprised me totally. Enough time in fact to go to the chippy for another huge dollop of beans and chips all smothered in malt vinegar, just like the evening that I arrived, which seemed like a year ago.

Now I’m sitting in the queue for the ferry, which leaves at 23:59. I hope that there’s a nice corner for me to curl up into. I’m exhausted!

Thursday 15th December 2011 – A WISE DECISION …

… staying here.

Not the least of reasons being that I’m warm and comfortable and at a reasonable price too.

It means that I can load up Caliburn a lot earlier than I would otherwise have done. And so I’m not rushing around panicking at the last moment like I always seem to do.

Having picked up the scaffolding yesterday I can run off to Manchester today, do a trip around Trafford Park for Screwfix and Toolstation for more stuff. Including a 35-litre plastic water tank.

As you might remember, the metal drum for my home-made immersion heater melted through while I was in Canada in the autumn. I’ve decided to build the next one with a plastic container. This is a cold-water container, it’s true, but I’m hoping that it will withstand a regular 60-70°C heat without too many problems.

I’d love to find a copper container somewhere, but I’m not sure how I’m going to do that. Eventually though, I’ll be lucky enough to find a good 50-litre copper immersion heater, and I can then make a new mounting plate for the element.

Later on, I went round to rescue Percy Penguin from work, and enticed her back to my lair to see where I was staying. She doesn’t live too far away from here. I had thought about taking her out for a meal, but when I asked her if she fancied some coq au vin, she got into the back of Caliburn.

But tomorrow I’m back on the road. I’ve a long way to travel and a lot of things to do.

Saturday 27th August 2011 – I’ve found a really interesting …

toolstation weapons of mass construction les guis virlet puy de dome france… plastic bag to wrap all of my tools and electrical bits into when I put them into my suitcase. And I’d love to have a remote camera in there to take a photo of the face of the security guard when he opens it. No sense of humour, these people. Am I the only one to notice that all of the humour and levity seem to have gone out of life these day?

But not to worry. I’ve also put a protractor, a set square, a set of logarithm tables and so in inside the suitcase. They are in a plastic bag labelled “Weapons of Maths Instruction”.

OK – I’ll get my coat.

And so it’s Saturday. And just for a change, I haven’t been shopping. There’s nothing I need to buy before I set off from here on Tuesday to go to Paris. And so I had a very leisurely breakfast – interrupted from my reverie by a large Ford Transit that came bouncing down the track here. “What does Simon want at this time of the morning?” I uttered. But a second glance revealed that the vehicle had French plates. “Is Terry back already?”. But no, it’s the baker in a different vehicle delivering the bread. That livened up the day.

So now wide awake and shipshape, I started to pack. Bill has lent me a big suitcase and Strawberry Moose fits nicely into it. Then, I’ve fitted all of the tools in there, some of the electrical stuff and also the slow cooker. Now I need to fit the rest of the electrical stuff, all of the paperwork and some clothes in there too. I’ve also sorted out some clothes to take – all colour coded and with logos on. I’m into colour-coding and corporate clothing and all of that stuff.

pointing fieldstone wall les guis virlet puy de dome franceThis afternoon I carried on working outside for a change. I finished off the pointing on the wall – at least all that it’s feasible to do right now until I take off the rest of the corrugated iron roof.

I’ve reached right up into the apex of the roof as you can see and over across to the other side of the roof. That’s over half of the roof finished now and while it would have been nice to have found the time to do all of it, I’m reasonably satisfied with that.

It won’t take long to do all the rest and then fit the wind turbine.

pointing fieldstone wall tarpaulin roof lean to les guis virlet puy de dome franceOnce I decided to retire for the day, I took down the ladder and fitted a couple of tarps over the bit where there’s no roof.

This is only going to be a temporary measure while I’m in Canada of course. Once the rest of the wall is pointed and the wind turbine is up, then I can roof it over properly.

Considering it’s Saturday, I’ve been extremely busy today and I’ll be glad to have a decent lie-in tomorrow – I’ve earned it.

Tomorrow if the weather is nice, it’s the Virlet brocante – one of the best in the area and I’ll go for a look around. I also have to plant some winter lettuce and cabbage and there’s some post to deal with – a few letters, two things to proof-read (one for Dave and one for Rhys) and half-a-dozen e-mails to reply to. When I’ve done that I can knock off because that will be everything that needed doing before I leave.

What? Up to date? Me? Perish the thought.

And in other news, at weekend I usually allow myself a handful of sweets. So this weekend I’ve finished the last of the root beer flavoured sweets because next weekend I can buy some more. They are only on sale in North America.

Monday 13th June 2011 – CALIBURN …

CALIBURN river ise FORD TRANSIT SWIM geddington NORTHAMPTON uk… went for a swim today.

We were out and about this afternoon in Northamptonshire meandering pretty aimlessly here and there in the general direction of Cambridge and we saw a sign for “Ford”.

With a sign like that of course we had to go for a look and Caliburn really fancied a swim. And he quite enjoyed it too

caliburn overnight parking a6 ambergate derbyshire ukLast night I found a good spec on the A6 near Ambergate in Derbyshire. This was where I bedded down and I had the Sleep of the Dead.

Not for long though. The arrival of the Roach Coach at 07:30 and the noise that it made as it installed tself soon woke me up.

Once I’d summoned up the courage to heave myself out of my stinking pit and grab a coffee from the aforementioned, I moved on to Ilkeston.

Here at Vehicle Wiring Products I bought a pile of 6mm “red” and “black” cable and a pile of other bits and pieces for back home. 6mm because it has to handle high current at 12 volt so I need to avoid voltage drop as much as I can.

And red and black cable?

I’m heavily into colour coding, especially in electrical wiring. It saves all kinds of unpleasantness. I’m trying to keep to blue and brown for 230-volt so I buy as much of that as I can. But for 12 volt, it’s red and black. No mistake with the colours.

The polarity of red and black speaks for itself, but with brown and blue, the bRown goes to the right to where the fuse is in a British plug, so it’s positive. The bLue goes to the left where there’s no fuse, so it’s negative.

And that’s why I use British plugs and sockets, not European ones. British plugs are fused and so that avoids all kinds of embarrassment if I’ve made a mistake with the wiring.

After that, I moved myself on to the M1 where I stopped at Leicester Forest East for a shower, a shave and to wash my clothes. High time that I did all of the aforementioned seeing as I’d been living in a van for a fortnight. Even I was starting to notice.

And I dunno what was going on at Donington Park last weekend but the services were crawling with Goths and the like. Had there been a rock concert down the road?

Next stop was Corby and Radio Spares where I bought a few more bits and pieces. It was a good job that I had forgotten to buy the 7-core trailer wire at Vehicle Wiring Products because it was on special offer at Radio Spares.

25 metres for £25 which is a bargain, and it was a desperate shame that there was only one roll left.

eleanor cross geddington northampton ukOn my way to Northampton I took a detour to visit the town of Geddington (which was where Caliburn went for his swim)

Several claims to fame, has Geddington, including the most magnificent Eleanor’s Cross.

The Eleanor concerned was Eleanor of Castille, wife of King Edward I “LOngshanks”. She died in Lincoln on 28 November 1290, and her body was embalmed and brought to London for burial in Westminster Abbey.

eleanor cross geddington northampton ukThe funeral cortège was an elaborate affair and took 12 days to reach Westminster Abbey.

At each place where the coffin rested, an elaborate cross was subsequently erected.

The Eleanor Cross at Geddington is considered by many to be the best of the three that remain, but even so, it is believed that there was an upper part which is now missing.

St Mary Magdalene, Geddington, NorthamptonshireBut I haven’t finished yet. There’s the church to see.

And the St Mary Magdalene Church is extremely special because it has every grounds to consider itself as one of the oldest churches in the UK (although there are a couple known to be older).

I’m not talking early crusader, or Norman Conquest either, but quite possibly 250 years older than that.

St Mary Magdalene, Geddington, NorthamptonshireChurches in the immediate post-Roman days were generally built of wood – that was because they art of building in stone had left with the Romans.

And that’s why there aren’t any still in existence today. I certainly can’t think of one, except maybe the church in Greensted, Essex, where bits of a 7th-Century wooden church were discovered in a later wooden church..

It was only gradually that the technique of stone-building was reintroduced to the UK and dates from the late Saxon period.

saxon stonework St Mary Magdalene, Geddington, NorthamptonshireAnd sure enough, if you look at the end wall here, you’ll see the primitive stonework over the arch, and the building lines where more-modern stonework starts when the church was enlarged.

Taylor and Taylor, in their Anglo-Saxon Architecture date the primitive stonework to the period 800-950.

While others might disagree with the dating, one thing upon which all of the experts agree is that it is certainly Saxon stonework, and that’s what it looks like to me too.

At Northampton I had to go shopping for Terry, so Ipicked up Terry’s orders from Screwfix, Toolstation and a couple of other places and then took the opportunity of doing some food shopping at the Morrison’s there.

By now it was early evening and so I headed off to Cambridge where I tracked down the University library.

That’s my port of call for tomorrow

And I almost forgot to tell you about the bridge too, didn’t I?

Geddington is situated on the River Ise (the river that rises in the field where the Battle of Naseby was fought in 1645) and is a very good fording place (as you have already seen, thanks to Caliburn).

This is where the cortège of Eleanor of Castille presumably crossed.

But with the improved stone-building techniques of post-Conquest England, stone bridges were constructed and fords fell out of fashion.

1250 park horse bridge river ise geddington northampton ukThe one here was built some time round about 1250 and is what’s known as a “pack-horse bridge” – with refuges for pedestrians as you can see.

It was rebuilt in 1784 – at least, that’s a date that’s carved onto some of the more-modern stonework – and was listed as a Grade II listed building on 25 February 1957.

It’s in excellent condition and it’s quite safe for Caliburn to drive over. But he thought that it would be much more fun to swim the river

Thursday 2nd June 2011 – I FOUND A …

caliburn overnight parking poplar motors lymm cheshire uk… lovely place to kip last night. A bit of old abandoned road near the Poplar Motors Cafe near Lymm on the edge of the M6.

Another one of those places that is totally deserted at night but when you wake up in the morning it’s swamped out with car-sharers.

And I had quite an early start this morning. Thanks for the text, Percy Penguin

With my early start it wasn’t long before I ended up on Trafford Park at Screwfix and Toolstation – my catalogues are out of date and need replacing.

And then round to Maccess – the auto-spars wholesalers – for some car bits (I still have my trade card for there from when I had my taxis).

Maccess has gone right downhill but I managed to spend £220 there all the same, including the new brake pads that I need for Caliburn (the guy at the MoT station said that they were down).

From there I sped along the M62 to St Helens to my storage unit. I’ve emptied that out and closed it down now.

A quick nip across the yard to Elite Workwear to order some more shirts with logos as the ones I have are getting a little shabby and I need some new stuff. It’s a reasonable quality, reasonable price and stops me worrying about what I’m going to be wearing.

Next stop was IKEA at Burtonwood but there was nothing really of interest there and so I went to the B&Q Superstore at Ashton-in-Makerfield for Caliburn’s suspended floor.

Here I really struck it lucky.

It seems that there was a salesman there from the B&Q Trade Counter working on a commission basis and short of his targets for trade customers. And the advantage of having corporate clothing and the like is that I actually look like a tradesman (which is, after all, the aim of it).

He asked for two proofs of identity which of course I don’t have, but one of the advantages of having a fully-signwritten van like Caliburn is that it looks kosher, no matter what the reality might or might not be, and that was the aim of that as well.

For the second piece of identity, which needed to be proof of a business address, did I not have in Caliburn the lease of my 1 cubic metre of mailbox in Stoke on Trent that I signed yesterday?

And so with a salesman desperately seeking a target figure and willing to turn something of a blind eye to the finer points of the paperwork, I now have a B&Q Trade Card, and you can’t knock that.

Especially as one of the reasons that I am here is to buy 5 glazed interior doors like the one into my little attic (that came from B&Q a few years ago).

I really can’t emphasise this enough – a van isn’t simply a means of transporting goods and possessions around – it’s 15 square metres of mobile advertising space and if you are in any kind of business you should make the most if it.

I reckon that over half of whatever it is that I have done has come due to the £250 I spent in having Caliburn signwritten.

And so to Crewe – and it seems that my house in Gainsborough Road needs a total rewire as the cabling is falling to bits. No surprise there – I bought the house in 1981 and the only attention that the wiring has had since then has been the couple of extra sockets that I added.

Actually, it’s probably them that need replacement – I didn’t have a clue what I was doing in those days … “and today?” – ed.

The estate agents also tell me that they had to replace the carpets on the ground floor as they were all threadbare. “Not to worry” I replied. “They were there when I bought the place in 1981” – which brought the house down.

“Well, you’ve had your money’s worth there then” said the agent.

After shopping at the new Morrison’s at Crewe, next stop was to rescue Percy Penguin, who couldn’t get home after work, and give her some personal attention.

And that was that. Here I am on Sandbach Services with a new mega-fast high-speed interent connection, and free too, thanks to Roadchef Services and BT Openlink.

I’m off to bed in a minute, if I can think of somewhere handy to sleep.

Saturday 22nd August 2009 – THIS IS ABSOLUTELY ASTONISHING!

solar energy record amp-hours les guis virlet puy de dome franceThe solar panels on the roof of the Luton Transit that feed the power to the barn (and originally to here with some very dodgy wiring) have been there since August 2007 and the most solar energy that they have ever received is 90.8 amp-hours, back on 22 April 2009.

Bearing in mind that fact that was some 2 months before the optimal date for capturing solar energy, you would expect that figure to be broken some time in midsummer but as yet it’s not quite managed it.

By contrast, the 3 panels on the roof of the house that are currently wired in capture a theoretical 21 watts more and although they are not angled optimally into the sun, they are situated in a much better location for catching the sun, so I had high hopes for these panels. But not 120.6 amp-hours worth.

That’s a pretty astonishing figure from just 390 watts, and with another 390 watts to come from the second bank of panels, you can understand why I’m optimistic about this set-up if I can generate these kinds of figures. This would represent just under 3KwH of electricity (1 KwH is about 88 amp-hours or so) being generated today on both banks of panels.

This morning I was awake long before the alarm went off and spent the morning tidying up, sowing some lettuce seed into a container in the verandah and rescuing some oregano and mint (with not having the time to do any gardening just now the whole place is going to pot!).

Lunchtime saw me in St Eloy shopping (or trying to shop if there was anything to buy – the place is rapidly going downhill) and when the DiY shop opened I went to get my polystyrene sheets for the battery box.
“We don’t carry that” said the owner. “You need to go to the builders’ merchants”
“Ok” I replied, heading for the door
“But it’s a waste of time going now. They are closed!”
This blasted country gets me down at times. The concept of customer service is getting to be as bad as the UK’s. Builders’ merchants closed on Saturdays when everyone has the weekend to do DiY, hotels that close for the summer holidays when they should be open for summer holidaymakers, restaurants “closed for lunch” (I’ve seen that!). No perishing idea.

If someone were to open a decent DiY in St Eloy they would clean up. And if Screwfix or Toolstation got their acts together and started to operate here they too would hit the jackpot.

So I piddled off the 40km to Commentry and the Bricomarche. Not only were they open (and that’s a surprise) and not only did they have my polystyrene (and what a price too! I needed oxygen after that!), they also had the missing bits for the guttering as well as the bits that I need to make a sump in my rainwater collection plan.

So …gulp … 68 Euros the lighter, I returned home, fitted the sump into the rainwater collection circuit (I’ll post a pic of it one of these days) and fitted the polystyrene into the battery box.

I put the other 6 batteries in there and I’ll remove away from the front door the 4 I’m currently using, and put them in the box. But that’s for tomorrow.

And while I was sitting drinking a coffee, an old beat-up little white Citroen pulled up at the back of the house. A couple had a look at the back of the house, had a good chat and then drove away. I wonder what that’s all about.

I suppose I’ll soon find out. But it’s been all go today, hasn’t it?

Sunday 12th July 2009 – WE STRIPPED THE ROOF

slates taken off roof house les guis virlet puy de dome france Yes, the roof is now off the house.

We all had a bit of a lie-in seeing as it was Sunday (and I can get used to having coffee brought to me in bed, I can tell you) and then we set off to chez moi. While I was sorting out the wood, the breathable membrane, the insulation and the new recycled slates, Terry did his war dance on the roof and the old slates didn’t last too long.

Getting up onto the roof though was easy. Not having a roof ladder (and refusing to pay £189.00 to Screwfix for one), the last time that I was in the UK I went to Toolstation and bought a bolt-on ladder hook for £25 or so and it’s certainly worth its weight in gold.

slates taken off roof house les guis virlet puy de dome franceAs well as removing all of the slates and much of the rotten wood, we also removed four mouse nests (and a large quantity of very angry mice), three birds nests, two plants and also one partridge and one pear tree. That took us until about 16:30 and in the words of the famous Arthur Naylor, “it’s not worth starting another case” and we drove back here.

Tomorrow we’re off to Brico Depot for the marine ply, some more chevrons, a roof window, the stainless tube we need for the chimney, the guttering and the crepi for the facade.

About 1000 Euros, I reckon. I’ll be selling my body on Boots Corner in Crewe if it carries on like this.