Tag Archives: plasterboard

Friday 13th February 2015 – THIS SUMMER DIDN’T LAST VERY LONG

It clouded over at about 18:00 this evening and by 20:00 it was p155ing down outside. So that’s that then.

But I have made enough progress today, so that it doesn’t matter too much.

First job was to sand off the second layer of filler on the wall. That didn’t take too long to do, and it doesn’t look too bad, although I would rather have been able to take off all of the plasterboard and start again. Anyay, it’s ready to paper and paint, whenever I’m going to be doing that – which won’t be for a while yet.

Next job was to move everything around in the bedroom so that the working space is next to where the wardrobe is. And hen I’d done that, I emptied the wardrobe. That was a horrible job and I hated every moment of it. I’ve found quite a bit of stuff that I had “lost”, as well as another hundredeight of screws and nails, but none of that compensates for the rubbish that I pulled out of the wardrobe area. There was even stuff in that corner that came from off the old roof when we ripped that out in 2009.

I can see a great big issue now in that I don’t have enough space left to store all of the stuff that I’ll be taking out of the bedroom when I need to empty it

There was still an hour left before lunch so I made a start on crepi-ing the OSB alls of the wardrobe. I worked up a good rhythm in there and I as doing so well that I ran a good half-hour past my normal knocking-off time and I didn’t care either.

crepi osb wardrobe wall les guis virlet puy de dome franceAfterlunch I cracked on with the crepi-ing and at 18:30 (another long day) I’d finished it all.

You can’t really see what it looks like because it as dark by the time I took the photo, but it’s come out quite nicely and I’m impressed. On Monday I can even fit the shelving, which will be progress indeed.

I had a nice hot wash in the water out of the home-made 12-volt immersion heater and then another load of the potato and lentil curry.

Now I’m all set up for the weekend – I’m off to Montlucon tomorrow.


-2

Thursday 12th February 2015 – I HAD A LATE START …

… today. I had about 10 minutes spare before I needed to start work qo I started on something really quick – and it was 11:10 by the time I finished.

But never mind – I still managed to accomplish everything that I had planned for today, and even found time to draw up a list of tasks to do before the bedroom can be called finished. There’s 15 on the list (and I’ve just thought of one more too) but I’ve already completed one of them so it’s not too bad.

First thing today was to sand off all of the remaining filler in the joints of the plasterboard. And now, of course, I look like a snowman … "snowPERSON" – ed. Once that had been done, I could put the second coat of paint on the landing wall. I still don’t like the colour but it went on good and thick and at 20:00 it was still wet.It’s going to take a while today.

This afternoon I had to fetch in a pile of wood as I’ve run out, and then I set to work on the second layer of filler on the plasterboard joints on the wall in the bedroom. It ddin’t take too much either – I must be getting good at this. Finally, I took off all of the masking on the landing and now I can get into the cupboard there and start putting stuff away.

I didn’t know what to make for tea tonight but just messing around aimlessly with a few bits and pieces here and rhere and I ended up with another mega-meal – this time of potato and lentil. It was nice, but it would have been even nicer had I had some onions handy, and there’s enough for four meals. So that’s problem solved until next week.

Tomorrow, I’ll be sanding down the second lot of filler, but then nothing’s going to happen to that for a while so I can leave it at that. I’ll also be emptying the wardrobe and painting that with crepi, ready to start fitting the shelves. I’m intrigued to see how far I can reach tomorrow.

-2

Wednesday 11th February 2015 – THIS MUST BE SOMETHING OF A RECORD

Today, I had a massive 169 amp-hours of excess solar energy and the water temperature in the home-made 12-volt immersion heater that I use as a dump load went off the scale (ie more than 70°C). There has never been that much surplus solar energy in the month of February – in fact we would not find too many days in July and August where we would have more than that.

That gives you some idea of what today wad like. The temperature outside reached 15.1°C and this was the first day for I don’t know how long when the temperature in my attic rose during the day rather than fell.

The increase in temperature prompted me into action and first job that I tackled was to paint the landing. But that wasn’t how it panned out, as I dropped my pliers into the 8 litres of white paint. They will be nice and pretty when I finally get down to the bottom of the tub and can fish them out. But that’s not going to be for a while yet.

landing painted yellow les guis virlet puy de dome franceSo here we are. You can’t really see things very well in the landing, but here’s the first coat of yellow paint on the wall. This is basically 8 litres of white emulsion and a tube of yellow paint pigment.

It’s not brilliant, but it will look much better tomorrow after I have done the second coat. And I don’t really like the colour – it’s come out much darker than I was expecting and much darker than what I wanted.

But never mind. it’s on and it’s staying on.

osb wall wardrobe s les guis virlet puy de dome franceAfter lunch, I started on the second piece of OSB for the end wall of the wardrobe. That eventually went into place with a little bit of manoeuvring and fine adjustment, and it won’t be coming out again.

It’s a different colour than the rest, due to the fact that I didn’t have enough OSB in the house and had to go outside and scrounge a piece that I had been using as part of the false floor in Caliburn. But as it’s being coated in crepi, it won’t make much of a difference.

This afternoon, after a few other bits and pieces that I had to do, I made use of the surplus solar energy and started to sand down the plasterboard. That took ages and I’ve only done about half of it, but the sandpaper on the sander split itself, at exactly 18:05, and I took that as being the signal to knock off for the day.

And those falafel balls and oven chips for tea were delicious again.

-2

Tuesday 10th February 2015 – IN WHICH OUR HERO MAKES GREAT STRIDES

The first lot of great strides took me up to Virlet and the mairie to be censored, seeing as how it’s census time again and I missed both visits of the census team. And it’s clear that the people at the mairie read this rubbish because the first question that I was asked was ” did I manage okay seeing as how I was snowed in for 10 days at home?” and the second topic of discussion was about the postie and an explanation as to why she couldn’t make it here. All totally unprompted.

Not only that, I was taken to see the new snow-clearing apparatus and I was asked for my advice about some technical aspects. Well, well, well. Whatever next?

Second lot of great strides were down to the bottom of the garden and the composting bin, where I empted out the beichstuhl and refilled it. Such delightful jobs that I have to do around here. Still, it’s all grist to the mill, and compost for the garden too.

Once those delights were sorted out, I attacked the bedroom and gave it a thorough cleaning – or, at least, the best cleaning that I can do seeing as how there are still four sheets of plasterboard in the middle of the floor. And as usual, running my big magnetic dish through the pile of sawdust and plaster dust and ordinary dust, I salvage about a hundredweight of screws and nails that have been dropped over the passage of time.

plasterboard stud wall bedroom les guis virlet puy de dome franceWith that out of the way, I can press on and fill all of the joins in the plasterboard. And how I wish that I have the time and the money (and the inclination) to rip off the wall everything that I did a few years ago in here and start again.

All of that work so far took until lunchtime and it really is quite impressive, even though I say it myself (apart from the rubbish plasterbaording of course). I could be quite happy living here.

Although it was still very cold today, we had another really bright alpine day. Not good enough for varnishing or painting, but good enough to sort out the circular saw and cut the first of the two end-pieces for the remaining unfinished wall of the wardrobe. To cut it, shape it and fit it, it took all afternoon firstly because it needed to be an exact fit – 1mm out and it’s no good at all, and secondly because trying to fit it on my own was almost impossible.

It had to be the upper piece that needed doing. That needs to be fitted first and difficult as it might be with nothing underneath it holding it in position, fitting it in second is impossible. In the end I had a crowbar wedged underneath it at the bottom and an endstop nailed to the beam above, and I was gently levering it into position between the uprights with a big wood chisel.

osb wall boarding wardrobe end les guis virlet puy de dome franceI had it in position and screwed in nicely after about an hour and a half, only to find out that it had slipped down the crowbar and was about 15mm out at the top. Taking it out was a barrel of laughs too, as was putting it back in again in the correct position but finally, at about 18:30 it was in exactly where it ought to be, and all screwed in position.

A wash in the beautiful warm water in the home-made 12-volt immersion heater (we had 104 amp-hours of surplus electrical energy today and we would have had more had I not used the circular saw) and up here for a nice warm fire and oven chips with peas, carrots and falafel balls.

What I’ll do tomorrow depends on the weather and the sun. We are promised a warm day and if that is indeed so, I’ll be painting the landing. Otherwise, I’ll be sanding down the filler.

But starting work on the wardrobe already. Isn’t this progress?

-1

Monday 9th February 2015 – THIS IS IMPRESSIVE!

Yes, I’ve had 105 amp-hours of excess solar energy today. The temperature of the water in the home-made 12-volt immersion heater that I use as a dump load rose from 0°C (yes, it was really cold in the living room) to 41°C and on knocking off this evening I was able to wash my hands in nice warm water.

That tells you the kind of day it was today. Clear blue skies for most of the day with just a few clouds scudding by round about lunchtime. And I was able to extract Caliburn out from under hsi snowdrift and go into Pionsat and the Intermarché to stock up on the grub.

Mind you, that was rather problematical because, on arriving at the supermarket at 14:00 I discovered that it was exceptionally closed until 16:00 due to a bereavement, so I had to go back a second time. Anyway, I’m now good for another week if we are snowed in again.*

I’ve also been able to fill up all of the water containers, seeing as how for a brief period this afternoon everything unfroze itself.

Meanwhile, back at the ranch, I started off this morning by tidying out the bedroom. I’ve emptied tons of stuff and taken it downstairs and in doing so, I’ve …
1) cluttered up downstairs completely
2) made a few exciting discoveries of things that I had lost an subsequently forgotten.

But here’s an interesting thing. I took the gas heater downstairs and in order to move it easier, I took out the gas bottle. I had a look on the date on it (I date the gas bottles when I fit them so that I know how long they last) and this one was dated 10th November 2010, and it’s almost full. That means that it’s over 4 years since I’ve paid for any heating here and at €30 every three weeks for 18 weeks or so per year, that’s a saving of 88 weeks divided by 3 and multiplied by €30, that’s about €900.

The woodstove on the other hand cost me €279 and of course my wood is free, and there’s also a saving on gas for cooking in the winter too. So you can see that this woodstove really is the best thing since sliced bread.

So having spent all morning emptying out the bedroom, I can walk all the way around and reach all of the walls ready to start the filling. And after lunch and shopping, I made a start. But I stopped pretty quickly too because, looking at some of the plasterboarding that I had done back in 2010, I ripped a huge pile out and redid it, with proper bracing. It’s amazing how much I’ve learnt and how far I’ve come on since I started on this.

Consequently, I didn’t get much of the filling done, and I’m hoping for a better day tomorrow.

However, that’s going to be interrupted too as I’ve been summoned to the Mairie tomorrow morning. I told you that I missed the census the other week while I was on my one and only day out, and they came round today to catch me – the first day for well over a week that I’ve been able to leave the house.

Typical, isn’t it?

-2

Wednesday 4th February 2015 – LEAVING THE FIRE …

… simmering away through the night did some good. It was 13.4°C in here this morning. Mind you, in the house downstairs it was an impressive 1.9°C. The weather really has gone cold here right now and it’s staying cold too. It had snowed during the night too.

First job was to make a start on the plasterboard walling.

plasterboard stud wall bedroom les guis virlet puy de dome franceThere was quite a bit of studdding that needed to be fitted – I hadn’t done that correctly at all – and then I cut the second piece of plasterboard (the first piece was fitted yesterday). That needed a hole cutting in it for the light switch. That’s much better than trying to cut four out, isn’t it?

You’ll notice the two length of wood screwed into the top of the first piece. Having had years of experience of fitting plasterboard single-handed, those lengths of wood make rails. You slide the plasterbord over the top and down the back, clamp it to an upright (ou can see the clamp at the top of the image) and then once you hve trimmed the board (GRRRRR!) it’s ready to be screwed into position.

Getting to that position took me until lunchtime at 14:00 but I wasn’t going to stop. I carried on fitting the rest of the plasterboard and that took me until 14:40.

After lunch, in view of the fact that there was a little sun, I vacuumed up the landing and then masked off everywhere ready for painting. No point in doing that though in 1.9°C.

To finish off tonight, I mixed up a bowl of filler and put it on the wall. That took me until 18:40 and then I knocked off and fled into my room. I was absolutely freezing. It’s no fun working in 1.9°C – and that’s indoors too.

-2

Tuesday 3rd February 2015 – IT’S BEEN ONE OF THOSE DAYS …

… when very little seemed to go right. After all of my exertions today until 18:30 this evening, I’ve put one (out of three) sheets of plasterboard on the wall, and that is that.

I started off by some more tidying up in the bedroom so that there was a place to work on the plasterboard, and then I cut the first sheet.

This needed four holes to be cut in for the pattresses, and then a frantic search for the pattresses and sockets. And despite a decent search, I can’t find the telephone socket that I bought the other day.

I then had to lengthen a couple of electric cables and that wasn’t easy either, and when I pulled out a redundant length of wire, I noticed that the insulation was shredded. A further search revealed that I’d put a plasterboard screw from the bathroom through into the conduit for the cables, so I had to remmove that and replace the wires.

But the screw was behind the batten for the suspended ceiling in the bathroom so I had to take the batten down. But the screw head was worn so I had to drill it out. And so the battery went flat in the drill.

And so it went on, and you get the picture.

Eventually, all of the wire was the correct length, in the correct place, properly routed and joined, and so I could offer up the plasterboard to the wall. It needed trimming off and so I had to take it all down again to trim it. And in puttilg it back, I smashed a corner of the plasterboard that I had spent all morning shaping.

But then again, that’s what filler is for and so it’s gone on the wall anyway. You’ve no idea how difficult to manoeuvre a sheet of plasterboard, thread four lots of cable through four lots of holes and then screw it to the wall all on your own.

But it’s done anyway, and if I’m lucky, I can fit the other two pieces tomorrow and – shock horror – maybe even paint the walls on the landing. But I’m not holding my breath.

It was freezing here this morning – 13.3°C. But that’s ot surprising seeing as how it was minus 6°C outside. And freezing where I was trying to work. That didn’t ease my humour any.

So tonight, I’ve banked up the fire and we’ll see what happens.

-1

Friday 30th January 2015 – NOW HERE’S A THING!

I was still working until after 20:00 this evening. And if that isn’t surprising enough, I’d already knocked off once and been down to Pionsat to do my shopping in the Intermarche, and then come back to carry pn working.

Mind you, this morning I thought that my muck was in. I was up quite early this morning and the sky was looking quite nice and blue. “At long last” I reckoned, “this would be the day where I could sand down the stairs, vacuum then and then varnish them”.

But it wasn’t to be.

I’d finished breakfast by 08:30 and so I set about doing a radio programme. By 10:00 I’d done the next month’s rock programme, including editing an hour-long live show. I must have been in a good mood.

However by this time, the weather had changed dramatically, and for the worse too. It was snowing quite heavily and all of the light had gone.

First thing that I did was to touch up the painting around the shelves. A bit of varnish had splashed here and there and I may as well have the place looking all shipshape.

recessed 12 volt LED light landing false ceiling les guis virlet puy de dome franceOnce I’d finished that, I set to on the end pieces for the plasterboard runs. And by 17:00 this evening every single piece was properly shaped, in position and nailed in place.

I’d even made the door frame for the bedroom, as you can see, and you’ll also notice the recessed light in the false ceiling on the landing.

Even though I say it myself, I’m really impressed with all of this, and no-one will ever notice that most of the end pieces and most of the door frame have been made from cut-down floorboard planks. It’s amazing what you can conjure up when you are driven by necessity.

There was still the filling to be done and so seeing that I was in such a good mood I pressed on. It was in the middle of all of this that I knocked off and went down to the Intermarché.

It’s now finished – or at least the first layer is, and i’ll sand it down at the first opportunity ready for the second layer.

For tea tonight I pushed the boat out and had oven chips, real baked beans and a veggie burger, all doused in proper malt vinegar.

And it was beautiful too.

-1

Tuesday 27th January 2015 – I’M POSSIBLY BEING A LITTLE OPTIMISTIC …

… about finishing the landing by the weekend. It’s been slow going today.

Mind you, it hasn’t helped in that I had a lot of housekeeping to do here this morning. I ran out of both kindling and logs, and the compost bucket needed emptying too. Doing that latter task, I found that the tie that’s holding up the collapsed apple tree had come apart and so that needed sorting out.

Eventually, I managed to start to attack the landing and Shock! Horror! all of the plasterboard is on the wall now. And not only that, the wiring is all tidied up and the light switches are in place.

I’m not going to post a photo of it though, because it’s a mess. What didn’t help the artistic impression was that I had spent an hour carefully carving a piece of plasterboard to fit perfectly and to take the pattress for the light switches, and then I dropped it from a height right onto the edge of the steps upon which I was standing, and knocked a huge lump out. Never mind, I can fill it but it isn’t pretty.

I had to put loads of battens in place too for the plasterboard, and some of the wood took a while to find. My aim to have it all done by lunchtime was thus totally missed. It was 17:00 by the time I had done all of the plasterboarding.

I’ve fitted the rails for the suspended ceiling – and that wasn’t easy either. And even though it was after 18:00 and knocking-off time, I fitted the symbolic first piece of ceiling. It was 18:35 when I finally made it up here. What helps about working late is having really good music to listen to. I’ve made it round to Hawkwind’s Astounding Sounds; Amazing Music, which features, inter alia, two of the most magnificent rock music tracks ever recorded – “Reefer Madness” and “Steppenwolf”.

As well as that, as I have said before … "and you’ll say again" – ed … that Ryobi Plus One percussion screwdriver is immense – it pushes 6×100 screws in like nobody’s business.

Tomorrow I’ll be fitting the rest of the ceiling and putting the first coat of varnish on. And if I have some sun (which isn’t likely, I have to say) I’ll be cutting the end pieces for the plasterboard runs and seeing if I’ll have the time to fit them.

It does however occur to me that in order to fit the end pieces on the stud wall between the landing and the bedroom I’ll need to have the bedroom door in position and the hinge lets cut out. That’s going to take a while and will be the big reason why I’ll miss my target of this weekend for the landing to be completed.

-1

Friday 23rd January 2015 – WE NOW HAVE …

beading around window and doors stairwell les guis virlet puy de dome france… some nice and pretty beading around the window and the doorways on the stairs up to the attic. Yes, I’m going all suburban and pretentious, aren’t I? Whatever next?

The Ryobi mastic gun did the business here, along with a tube of contact adhesive. Cut the beading to length (remember to cut the bevels the correct way round – GRRRR!), stick some glue in the angle, press into place and then tack down with a couple of 25mm lost-head nails, and there we are.

And doesn’t it look pretty too? It’s not like me, is it?

plasterboard on wall on landing les guis virlet puy de dome franceIn other startling news, we have also turned the corner. at least, as far as the plasterboard goes. I’ve put the first pieces on the stud wall for the stairs that go down to the ground floor.

This is quite symbolic progress. All that’s now needed is one more piece of plasterboard on the reverse side of the stud wall to the bedroom, three end-pieces, some filling and sanding down, and then I can wallpaper the walls on the landing and that will be finished too and I can start on the bedroom. I shan’t know myself.

I know that I said that I would be sanding down the stairs and vacuuming them ready to varnish them this weekend, but several things have conspired together to put an end to that idea.

Firstly, I’m not going out tomorrow. Cécile is having a visitor to her house in the morning tomorrow so I have to go round there early. That means that I won’t have time to varnish it before I go out.

Secondly, Mondays radio recording sessions have been cancelled due to illness at Radio Tartasse, so the third consecutive day that I need for varnishing isn’t going to happen either.

Thirdly, we’ve had a hanging cloud over the mountain all day today and I’ve received precisely nothing in the way of solar energy. There’s plenty of power in the batteries of course, but not enough to run a power sander for a couple of hours and a vacuum cleaner afterwards.

Fourthly, the temperature didn’t rise above freezing all day today and the next few days are likely to be the same. The temperature downstairs is just 4°C and the varnish won’t ever stick in that kind of temperature. It’ll just sit on top of the wood and freeze, and then break off when it’s knocked.

Accordingly, I left the varnishing for another time. Never mind. There’s plenty of other things to be going on with.

I was invited out this evening. It’s the annual dinner for FCPSH – the Football Club Pionsat St Hilaire, and I was invited to go along. I didn’t stay to eat because you can’t expect them to cater for my diet, but I was there chatting for a couple of hours.

And it really was freezing when I returned. I had a hard job to keep my feet on the concrete. And in my room the temperature had fallen to 9.8°C – the coldest for quite a while, but a roaring wood fire soon had that back up to normal again.

I’m glad that I bought this woodstove.

-1

Saturday 10th January 2015 – I’M A FIRM BELIEVER …

… that if a thing is destined to happen, it will happen. Regardless of however much input one puts (or doesn’t put) into the whole procedure. It seems to happen time and time again and the only secret of this is, as Jacqueline De Bellefort said in Death on The Nile – “You have to follow your star wherever it leads, even to death itself”.
é
And with this in mind, I went off to Commentry this afternoon.

Mind you, I nearly didn’t.

I had made a stunning breakthrough with this 3D program that I’ve been playing with. I had totally given up on the modern version of it ages ago and had gone back to an ancient version, and there I was last night trying to make a 4th Generation character work properly when, all of a sudden, it all clicked into place and I was so engrossed in what I was doing that it was 06:00 this morning before I realised it, and I hadn’t had any tea either.

Consequently, it was 11:20 when I crawled out of my stinking pit and seeing the bright sunlight and clear sky I resolved to go to Commentry and the swimming baths. Pausing only to add a little more filler to the wall where there was a hole or two, at 13:30 I was off on the road.

The pool was a little (just a little) warmer than last time, practically empty and the shower was just as delicious, even though the private showers were closed for maintenance. And seeing that I was only half a mile from Bricomarché, I went off in search of some sunken hinges – I’ll need these for the trapdoor that I’ll be making in a week or so.

While I was there, not only did I find siome hinges that will do the job, I solved the problem of the handrail for the stairs. Some huge screwed eyes, with 16mm holes, and a 2-metre length of some very nice 14mm hemp rope – that will make a lovely handrail.

But here’s the exciting bit, that relates to what I was talking about earlier. I was thinking again about these wooden ends for the plasterboarding. Cutting up pine boards was my original idea but at Montlucon the other week the stuff on offer was rubbish. At Bricomarché the stuff is so much better, the staff is so much more friendly and they have cutting facilities too.

So while I was wandering around turning things over in my mind, I came across the tool sale, and there on offer at just €44:00, was a cheap 600-watt table saw. It was the last one in stock too.

It’s not the ideal thing, but it’s the nearest that I can find and i’ll need to build a table for it if I’m going to cut doors down doors and things like this, but for what I want to do at the moment it’s ideal. I can soon trim down half a dozen floorboards with this.

I went to the new NOZ at Commentry too. I didn’t buy anything exciting but nevertheless it was a good opportunity to have a look round.

Back here, nice and clean for once, I crashed out for an hour or two. And I’m not surprised either. And I’m off to bed in a minute with nice, clean bedding too. And as it’s Sunday tomorrow, I ccan have a nice lie-in.

But I’m glad I followed my star all the way to Bricomarché at Commentry today.

-2

Thursday 8th January 2015 – IT WAS HARD …

… to get out of bed this morning. Being up and about at 04:00 might have something to do with it.

But it was a good job that I did get up though, because Terry came round to borrow a tool. And no-one was more surprised than me that I was able to put my hands straight on them.

And that wasn’t the only thing that was surprising. You may remember that I’ve been looking for the electric sander for the last couple of days? I had a flash of inspiration and went over to where it was supposed to be (although it’s been a long time since any other tool has been there) and, sure enough, there it was. However did that happen?

stairwell plasterboard filling les guis virlet puy de dome franceSo after all of that, I started work. with the aid of Caliburn’s ladder, I reached into the corners of the stairwell, masked off everywhere and attacked the gaps in the plasterboard and the screwheads with the filler. The, I made a very wet mix of filler and went around everywhere putting a second coat on the low spots, of which there were quite a few.

After lunch, I started to attack the filler with the electric sander. It looks like a snowstorm out there at the moment, even though I was only able to give about 30 or 40 minutes’ worth of sanding as the weather changed dramatically and I lost the sun behind a huge black cloud.

home made wiring clamp les guis virlet puy de dome franceLooking for something to do for the last hour or so before knocking off, I started on the wiring again. When I had straightened it out a few days ago, everything was in a real tangle so I didn’t make much progress. But with the hour or so that I had, I untangled everything, routed it properly and tidily, nd then made two wire clapms out of old wood battens and some 4×60 screws and clamped all of the wires to the ceiling beams.

Yes, we are definitely making major progress here and if I can finish the sanding tomorrow, providing that I can have 12amps of current, I’ll be ready for wallpapering next week.

I shan’t know myself then.

0

Tuesday 6th January 2015 – ANOTHER MILESTONE …

… has been reached today.

Remember in the Spring when I bought that 500-watt ash sucker that I reckoned that I could convert quite easily into a vacuum cleaner? Well, without any conversion at all, I used it today to vacuum all of the dust that had collected on the stairs over the last year or so. And I was ever so impressed with this, almost as much as I wam with my galvanised steel dustbin. Even though it’s only 500 watts, it did a terrific job – much better than I was expecting. Once that had been done, I set to and masked off everywhere in the stairwell that I could reach.

The small ladder that I used when I fitted out the stairwell is now being used in the inspection pit and so I had to spend most of the day being an acrobat trying to reach the far-flung corners, and it wasn’t until I’d knocked off that I asked myself how come I hadn’t thought about the small ladder on the roof of Caliburn.

It took ages to mask off the stairwell and so that left me only about an hour or so to start to fill in the screw heads and the plasterboard joints. It’s going to take much more than that to do all that needs doing, and so I’ll be spending most of the day on Caliburn’s ladder, assuming that I remember to fetch it.

WHat else I’ll be doing is to try to hang the door for the cupboard at the back of the stairs. I put the final coat of varnish on that this morning and so tomorrow morning I can fit the hinges on the door and measure up to fit the hinges on the doorframe.

0

Monday 5th January 2015 – I CRACKED ON …

… with the work today, but not necessarily in the direction in which I was intending to go.

I started off by cutting down some floorboarding planks to the correct size to make the end pieces for the plasterboard runs and the doorway into the cupboard at the back of the stairs and at the end of the wall by the stairs. The latter one involved some quite intricate shaping but it was soon done and doesn’t look to bad.

And I do have to say, if I haven’t already … "yes you have" – ed … that this Ryobi Plus One percussion screw driver is a tremendous piece of kit and I’m thoroughly impressed with this – almost as much as with my galvanised steel dustbin.

Next job was to clean off the stairs and mask off everything ready to start the filling of the plasterboard joins and screw holes, but then I had another idea.

If I sand down the filler (and for the moment, I can’t find the sander) the dust will go everywhere, including into the cupboard at the back of the stairs, so the cupboard will need to be masked off. And that gave me an idea. If I have to mask off the cupboard, why don’t I simply make the door for the cupboard instead? Killing two birds with one stone as it were.

door made of floorboards for cupboard at back of stairs first floor les guis virlet puy de dome franceAs it happened, I had a pack of the cheap floorboarding left over, and that was exactly what I needed for the job.

I assembled the four lengths, battened them and reinforced the battens, cut the door to size (four cuts with the circular saw – just as well we had another Alpine day today) and then cut the lets for the hinges. The first coat of varnish went on too before knocking-off time and that was that for today.

This evening, the temperature in here reached almost 30°C as I cranked up the fire to cook some tea. I brought up some fresh wood and that burned fine, and then I put in some of that old damp stuff and it seemed to dry out as the fire became hotter. It was all quite impressive.

Tomorrow I’ll be putting the other two coats of varnish on the door and tidying up ready to start on finishing off the stairway.

-1

Wednesday 31st December 2014 – NOW HERE’S A THING.

While I was having (a rather late) breakfast this morning, I started to empty out the woodstove and clean the glass window. But much to my surprise, the big log that I put in there last think last night was still smouldering away.

It didn’t fire up however when I opened the foor, but it was still something of note to see it.

After breakfast, Iwent out to look at this idea of fitting the wood to the ends of the runs of plasterboard as I mentioned yesterday. However, I was thwarted right at the start, because it was one of these jobs where you needed to do several other things before I could start.

I had to fit a few lengths of tongue and grroving as a false ceiling, but before that I had to fit the plasterboard onto part of the stud walling. And before I could do that, I had to move some wiring around.

Anyway, you get the picture.

However, we have made a little bit of history because we now have, for the first time, plasterboard on both sides of part of the stud walling. That’s history in the making of course, and it means that whatever is between the two layers of plasterboard is there for good now, in exactly the same place as it’s going to be.

tongue and groove ceiling wooden plasterboard ends les guis virlet puy de dome franceThere’s 5 lengths of tongue and grooving in the ceiling as well, enough to clear the stairway.

And while I was doing all of this, I had another idea. I don’t have too much of this wood that I was talking about yesterday, so seeing that it’s good, heavy stuff I’m going to save it for where I’m putting the hinges for the doors. For the rest, I’ve been experimenting with floorboarding. I cut one to size, trimmed off the tongue and then with the circular saw I cut the width to size.

I had to file and sandpaper the edge where I cut the width to size, and it didn’t turn out to be as bad as I was fearing. A power plane or a belt sander would finish them off quite nicely but I don’t have them so I’ll have to do without.

So while it might not look as if I’ve done much today, it is in fact an enormous amount of progress both physically and psychologically too. Just one piece of wood to be fitted and then I can start to fill and then sand down the stairwell ready for wallpapering and painting

-1