Tag Archives: electric sander

Wednesday 11th February 2015 – THIS MUST BE SOMETHING OF A RECORD

Today, I had a massive 169 amp-hours of excess solar energy and the water temperature in the home-made 12-volt immersion heater that I use as a dump load went off the scale (ie more than 70°C). There has never been that much surplus solar energy in the month of February – in fact we would not find too many days in July and August where we would have more than that.

That gives you some idea of what today wad like. The temperature outside reached 15.1°C and this was the first day for I don’t know how long when the temperature in my attic rose during the day rather than fell.

The increase in temperature prompted me into action and first job that I tackled was to paint the landing. But that wasn’t how it panned out, as I dropped my pliers into the 8 litres of white paint. They will be nice and pretty when I finally get down to the bottom of the tub and can fish them out. But that’s not going to be for a while yet.

landing painted yellow les guis virlet puy de dome franceSo here we are. You can’t really see things very well in the landing, but here’s the first coat of yellow paint on the wall. This is basically 8 litres of white emulsion and a tube of yellow paint pigment.

It’s not brilliant, but it will look much better tomorrow after I have done the second coat. And I don’t really like the colour – it’s come out much darker than I was expecting and much darker than what I wanted.

But never mind. it’s on and it’s staying on.

osb wall wardrobe s les guis virlet puy de dome franceAfter lunch, I started on the second piece of OSB for the end wall of the wardrobe. That eventually went into place with a little bit of manoeuvring and fine adjustment, and it won’t be coming out again.

It’s a different colour than the rest, due to the fact that I didn’t have enough OSB in the house and had to go outside and scrounge a piece that I had been using as part of the false floor in Caliburn. But as it’s being coated in crepi, it won’t make much of a difference.

This afternoon, after a few other bits and pieces that I had to do, I made use of the surplus solar energy and started to sand down the plasterboard. That took ages and I’ve only done about half of it, but the sandpaper on the sander split itself, at exactly 18:05, and I took that as being the signal to knock off for the day.

And those falafel balls and oven chips for tea were delicious again.

-2

Thursday 5th February 2015 – 12.8°C IN HERE THIS MORNING.

Hardly surprising, seeing as how downstairs it was all of 1.4°C. And (even at 10:00) it was minus 4.5°C outside.

decorator's door landing les guis virlet puy de dome franceConsequently, I have this morning fitted a decorator’s door to the head of the stairs on the landing.

These are great things, thrown together out of a bit of old plastic sheet and scrap offcuts of wood. Their main purpose is to stop the passage of dust into areas that are being painted, but they also work for keeping in the het and keeping out the cold. IN fact, you can feel the difference either side of the door so it’s clearly working. And as the temperature dropped downstairs, on the first floor we remained at a rather comfortable, if not balmy, 4.5°C

So having done that, and done some more tidying up, what was next?

windowsill bedroom les guis virlet puy de dome franceAhhh yes. We now have a windowsill in the bedroom.

This is from an offcut of pine board and normally it would be having about 3 coats of varnish on it. But that’s a waste of time with the temperature in the bedroom at 4.5°C.

The board took ages to fit as it needed to be carefully cut and shaped, and it’s come out quite well. But one unforeseen problem was that the window wouldn’t open with the sill in position. But that power belt sander that I bought the other day is superb, even if it did break the belt. Ith having something like some sun this afternoon I could use it. It did a really good job of sanding down where necessary and now there’s about 3mm of clearance under the window.

After lunch I tracked down some thin wood offcuts such as scrap tongue and groowing and nailed them to the wall inside the window and then started to clad the inside of the window with tongue and grooving like I did to the window at the head of the stairs. I have some of the t&g left over from when I did the bedroom ceiling and together with the offcuts from other projects, I should have enough to do a decent job there

I’ll post a pic when I’m finished with that.

I knocked off at 18:30 and it was just 9.3°C in here. And it’s snowing heavily outside too. If that’s not enough, the 10-day long-range weather forecast is promising not much let-up in the weather. It’s a good job that I don’t really need anything from the shops, as I won’t be able to go to fetch it.

-2

Thursday 8th January 2015 – IT WAS HARD …

… to get out of bed this morning. Being up and about at 04:00 might have something to do with it.

But it was a good job that I did get up though, because Terry came round to borrow a tool. And no-one was more surprised than me that I was able to put my hands straight on them.

And that wasn’t the only thing that was surprising. You may remember that I’ve been looking for the electric sander for the last couple of days? I had a flash of inspiration and went over to where it was supposed to be (although it’s been a long time since any other tool has been there) and, sure enough, there it was. However did that happen?

stairwell plasterboard filling les guis virlet puy de dome franceSo after all of that, I started work. with the aid of Caliburn’s ladder, I reached into the corners of the stairwell, masked off everywhere and attacked the gaps in the plasterboard and the screwheads with the filler. The, I made a very wet mix of filler and went around everywhere putting a second coat on the low spots, of which there were quite a few.

After lunch, I started to attack the filler with the electric sander. It looks like a snowstorm out there at the moment, even though I was only able to give about 30 or 40 minutes’ worth of sanding as the weather changed dramatically and I lost the sun behind a huge black cloud.

home made wiring clamp les guis virlet puy de dome franceLooking for something to do for the last hour or so before knocking off, I started on the wiring again. When I had straightened it out a few days ago, everything was in a real tangle so I didn’t make much progress. But with the hour or so that I had, I untangled everything, routed it properly and tidily, nd then made two wire clapms out of old wood battens and some 4×60 screws and clamped all of the wires to the ceiling beams.

Yes, we are definitely making major progress here and if I can finish the sanding tomorrow, providing that I can have 12amps of current, I’ll be ready for wallpapering next week.

I shan’t know myself then.

0