Tag Archives: varnishing door

Thursday 26th March 2015 – ONE MORE COAT …

… of varnish on the floor and the varnishing will be finished. Every vertical surface has already had two coats of varnish, and every horizontal surface three, except of course the floor. And that will be done first thing tomorrow morning.

That new varnish from Mr Bricolage seems to be okay- it needs a really good mixing but then it spreads quite nicely. I’ll have to remember that varnish next time I’ll be varnishing.

That really is all that I’ve done today – as if that isn’t enough. You’ve absolutely no idea of just how much bare wood there was in that bedroom and it took ages to do. But it all looks so nice now and so it was well-worth the effort.

Tomorrow, once the varnish has dried, I’ll be fitting the skirtung board and then trying to install the glass over the door without dropping it. Putting the hanging rails in the wardrobe will be the final job and that bedroom will finally be finished. I can then move all of the clothes and the chests of drawers down there, and my attic will be so much emptier.

That’s not quite true. I need to sort out the lights in there. At the moment there are just some LED lightbulbs dangling from the ceiling and I’m not sure what I can do to make that look pretty. I have one or two ideas and I’ll have to see how they pan out.

I had yet another small fire in here tonight seeing as the temperature was just 14.9°C. That’s 2°C higher than my threshold temperature, but I made a huge pepper and chickpea curry tonight and that cooks nicely in the oven, so why not light the fire and be comfortable while i’m doing it? And it took the leftover wood from yesterday, a floorboard offcut and half a log. Talk about cheap cooking and heating.

Yes, this little wood fire with tiny oven is the best thing that i’ve ever purchased for here.

Tuesday 6th January 2015 – ANOTHER MILESTONE …

… has been reached today.

Remember in the Spring when I bought that 500-watt ash sucker that I reckoned that I could convert quite easily into a vacuum cleaner? Well, without any conversion at all, I used it today to vacuum all of the dust that had collected on the stairs over the last year or so. And I was ever so impressed with this, almost as much as I wam with my galvanised steel dustbin. Even though it’s only 500 watts, it did a terrific job – much better than I was expecting. Once that had been done, I set to and masked off everywhere in the stairwell that I could reach.

The small ladder that I used when I fitted out the stairwell is now being used in the inspection pit and so I had to spend most of the day being an acrobat trying to reach the far-flung corners, and it wasn’t until I’d knocked off that I asked myself how come I hadn’t thought about the small ladder on the roof of Caliburn.

It took ages to mask off the stairwell and so that left me only about an hour or so to start to fill in the screw heads and the plasterboard joints. It’s going to take much more than that to do all that needs doing, and so I’ll be spending most of the day on Caliburn’s ladder, assuming that I remember to fetch it.

WHat else I’ll be doing is to try to hang the door for the cupboard at the back of the stairs. I put the final coat of varnish on that this morning and so tomorrow morning I can fit the hinges on the door and measure up to fit the hinges on the doorframe.

Monday 5th January 2015 – I CRACKED ON …

… with the work today, but not necessarily in the direction in which I was intending to go.

I started off by cutting down some floorboarding planks to the correct size to make the end pieces for the plasterboard runs and the doorway into the cupboard at the back of the stairs and at the end of the wall by the stairs. The latter one involved some quite intricate shaping but it was soon done and doesn’t look to bad.

And I do have to say, if I haven’t already … "yes you have" – ed … that this Ryobi Plus One percussion screw driver is a tremendous piece of kit and I’m thoroughly impressed with this – almost as much as with my galvanised steel dustbin.

Next job was to clean off the stairs and mask off everything ready to start the filling of the plasterboard joins and screw holes, but then I had another idea.

If I sand down the filler (and for the moment, I can’t find the sander) the dust will go everywhere, including into the cupboard at the back of the stairs, so the cupboard will need to be masked off. And that gave me an idea. If I have to mask off the cupboard, why don’t I simply make the door for the cupboard instead? Killing two birds with one stone as it were.

door made of floorboards for cupboard at back of stairs first floor les guis virlet puy de dome franceAs it happened, I had a pack of the cheap floorboarding left over, and that was exactly what I needed for the job.

I assembled the four lengths, battened them and reinforced the battens, cut the door to size (four cuts with the circular saw – just as well we had another Alpine day today) and then cut the lets for the hinges. The first coat of varnish went on too before knocking-off time and that was that for today.

This evening, the temperature in here reached almost 30°C as I cranked up the fire to cook some tea. I brought up some fresh wood and that burned fine, and then I put in some of that old damp stuff and it seemed to dry out as the fire became hotter. It was all quite impressive.

Tomorrow I’ll be putting the other two coats of varnish on the door and tidying up ready to start on finishing off the stairway.