Tag Archives: no solar energy

Friday 23rd January 2015 – WE NOW HAVE …

beading around window and doors stairwell les guis virlet puy de dome france… some nice and pretty beading around the window and the doorways on the stairs up to the attic. Yes, I’m going all suburban and pretentious, aren’t I? Whatever next?

The Ryobi mastic gun did the business here, along with a tube of contact adhesive. Cut the beading to length (remember to cut the bevels the correct way round – GRRRR!), stick some glue in the angle, press into place and then tack down with a couple of 25mm lost-head nails, and there we are.

And doesn’t it look pretty too? It’s not like me, is it?

plasterboard on wall on landing les guis virlet puy de dome franceIn other startling news, we have also turned the corner. at least, as far as the plasterboard goes. I’ve put the first pieces on the stud wall for the stairs that go down to the ground floor.

This is quite symbolic progress. All that’s now needed is one more piece of plasterboard on the reverse side of the stud wall to the bedroom, three end-pieces, some filling and sanding down, and then I can wallpaper the walls on the landing and that will be finished too and I can start on the bedroom. I shan’t know myself.

I know that I said that I would be sanding down the stairs and vacuuming them ready to varnish them this weekend, but several things have conspired together to put an end to that idea.

Firstly, I’m not going out tomorrow. Cécile is having a visitor to her house in the morning tomorrow so I have to go round there early. That means that I won’t have time to varnish it before I go out.

Secondly, Mondays radio recording sessions have been cancelled due to illness at Radio Tartasse, so the third consecutive day that I need for varnishing isn’t going to happen either.

Thirdly, we’ve had a hanging cloud over the mountain all day today and I’ve received precisely nothing in the way of solar energy. There’s plenty of power in the batteries of course, but not enough to run a power sander for a couple of hours and a vacuum cleaner afterwards.

Fourthly, the temperature didn’t rise above freezing all day today and the next few days are likely to be the same. The temperature downstairs is just 4°C and the varnish won’t ever stick in that kind of temperature. It’ll just sit on top of the wood and freeze, and then break off when it’s knocked.

Accordingly, I left the varnishing for another time. Never mind. There’s plenty of other things to be going on with.

I was invited out this evening. It’s the annual dinner for FCPSH – the Football Club Pionsat St Hilaire, and I was invited to go along. I didn’t stay to eat because you can’t expect them to cater for my diet, but I was there chatting for a couple of hours.

And it really was freezing when I returned. I had a hard job to keep my feet on the concrete. And in my room the temperature had fallen to 9.8°C – the coldest for quite a while, but a roaring wood fire soon had that back up to normal again.

I’m glad that I bought this woodstove.

-1

Saturday 6th December 2014 – I’VE BEEN OUTSIDE …

… just once today. And that was about an hour ago to take the statistics. And much to my surprise, I’ve had just half an amp of electricity today – and that was in the barn. It just shows you the importance of inclining the solar panels at the correct angle. Even though there are 6 solar panels on the roof of the house and just two on the barn, the roof panels are inclined at 48° (the pitch of the roof) whereas the ones on the barn are inclined at 71°, which is exactly what they ought to be (degrees north of the Tropic of Capricorn).

I had a late night last night, just for a change these days, and although I woke up when the alarm went off, one look out of the window convinced me that I was wasting my time. It was snowing just then, and had been for a while, and so I went back to bed.

When I finally did raise myself from the Undead, at 09:20, the snow had changed to light rain, and we had 5mm throughout the day. After breakfast I attacked the next month’s rock music radio programmes and they are now complete. It took me ages though because I’ve had to manufacture another concert as well as a speech, and everything was at different speeds and volumes so all of this needed arranging.

I’m beginning to understand how it was that when the radio station did the engineering, they made such a mess of it. I know the results that I am trying to achieve and it isn’t at all easy. The engineers don’t have a clue so they must have found it impossible.

I’ve also been spending some money again. This plant trailer that I bought with the mini-digger is a decent bit of kit, that’s for sure, but as I said the other day, I don’t know who has been playing with the electrics. The rear lights are add-ons – these really cheap and nasty 3-function lights that cost coppers each. And they don’t work either so there’s an even cheaper and nastier trailer board attached.

I hate trailer boards, especially on good-quality equipment, and so having a good browse around on the internet I’ve found a pair of rear lights – 5-function rear lights – that are such a good fit that they might even be the original equipment.

As well as that, I’ve bought a pair of these tiny LED real numberplate lights and a pair of side marker lights, the type that are on stalks so that they can be fitted on the mudguards to mark the extreme width of the trailer.

Apart from that, I’ve not done much else. It’s not been the weather for it.

-2

Tuesday 2nd July 2013 – *@ç#%§µ ¤£&€ù+§ cheap flaming useless tools!!!

damaged arbour sds dtill les guis virlet puy de dome franceThat’s the arbour off the core drill kit that I bought (and spent a lot of money on) 18 months or so ago. The drill end is totally burnt out.

What’s been happening here is that the arbour has not been a precise fit in the chuck of the SDS drill. With the 4 hours of constant pounding that it received yesterday, the percussion effect of the play slowly but surely enlarged the groove in the arbour until it burnt through.

Mind you, as I said yesterday, the impressive thing about this is that everything else – the inverter, the batteries, the wiring, even the LIDL drill, stood up to everything that I could throw at it.

I expected loads of other things to burn out before the arbour would give way.

And it took me hours to dismantle the SDS drill too before I could extract the arbour, and I can tell you absolutely everything about how an SDS drill works now because I’ve seen it first-hand.

Anyway, once I’d freed the arbour I cleaned and greased everything and then reassembled it.

I’m not sure how the automotive circlip will stand up to the pounding but then that would be hammered to death in the con-rods and pistons anyway with much more force than an SDS drill so it should be okay.

rail cascading off verandah roof les guis virlet puy de dome franceTook hours, as I said, and it didn’t make any difference to my work programme because I couldn’t have drilled anything anyway.

Look at the rain cascading off the verandah roof. We had the most amazing tropical thunderstorm, as you can see.

It’s been a long time since I’ve seen rain like we had this afternoon although believe me, we have had some here for sure in the past as you know.

Not much good for working in but impressive all the same. And for a while there was no solar energy getting through at all. No chance of doing any drilling today of course, but there is still plenty of work to be going in with.

Later on in the afternoon I did manage to get into the shower room. I started cutting and shaping the horizontal supports for the stud wall between the shower room and the bedroom.

I cut and shaped four of them before I ran out of demi-chevron (and I wasn’t going outside for another one in that weather) and I managed to screw one of them in place before the batteries in the Ryobi Plus One drill and screwdriver went flat.

It just wasnt my day at all.

Mind you, it was 19:40 when I finished off so I suppose it was time enough. But I need to get cracking tomorrow.

I’m wasting far too much time and I don’t have too much to spare.

-3

Tuesday 4th May 2010 – I’ve been working inside today …

bedroom fireplace les guis virlet puy de dome france… and I’ve made an exciting discovery. In the bedroom there was a wooden fire surround with a small coal-fired stove and a metal backplate. So as my insulating of the walls is now about to move around the corner I need to remove the stove and the fireplace.

Once I had done that the backplate came away and a whole pile of dirt dust and rubble fell away with it leaving (after I had cleared it up) a big fireplace.

Including a fire basket too, When I think of all of the time I have wasted looking for a fire basket and there we are with one bricked up in a wall.

So why have I been working inside?
The answer is –
water bucket max temp 11; min temp 9.5. Solar energy in the barn 0.0
Yes, a full and heavy cloud that has stopped any sunlight getting through, and has stopped the heat radiating back into the sky at night.
There’s no need to tell you that rainfall was a whopping TWENTY SIX mm today. You’ve probably worked that out already.

And so there you are.

Tomorrow Liz Terry and I are going to the Chambre des Metiers. I rang them up first thing and the woman explained that she would have someone call me back that morning. Of course they haven’t so it’s doorstepping time

-2