Tag Archives: circular saw

Wednesday 22nd July 2015 – I DIDN’T MANAGE …

… to beat the alarm clock this morning. It was a little more difficult to crawl out of my stinking pit this morning.

Still, I had breakfast and had the usual several hours on the computer sorting out a few things that have been hanging around for a few years. I also had one of these telesales people on the phone trying to sell me window shutters and I kept him on the telephone for 30 minutes.

After lunch, I attacked the bathroom ceiling and I can now say with complete assurance that it’s all finished. It didn’t seen too much trimming either, much to my surprise. Just a case of nipping off a couple of edges with a mallet and chisel.

I was half-expecting to have to trim down a full length of board, so no-one was more surprised than I was about how good the fit was. I couldn’t have done it better had I measured it up purposely.

The bathroom ceiling is lower than the ceiling on the landing so it needed an end-piece. A rummage around in the barn produced an offcut length of floorboarding that was soon cut down to size (I’m as impressed with this new circular saw as I was with my galvanised steel dustbin) and trimmed to fit, and then sanded off with the belt sander. And it’s come up a treat, that’s for sure, fits quite nicely and looks quite good as well.

I finished off the afternoon by tidying up in the bathroom and that’s almost completed. If I can finish that off tomorrow and do the masking off, I can start to varnish the ceiling. 3 coats of that and I’ll be ready to do the tiling.

For tea tonight I made a mega-red-pepper-and-lentil curry to keep me going for the next four days, and I’ve noticed that I seem to be overrun with ants in the verandah and the downhill lean-to. Where have all of these come from? Is it a coincidence that we had another brief shower of rain earlier in the evening?

0

Monday 6th July 2015 – NOW HERE’S AN INTERESTING DISCUSSION.

Our Hero – “is it tomorrow that we are recording at Marcillat?”
Liz – “that’s right – at 09:30”
Our Hero – “ohhh” … pause … “I suppose that I’d better go home then”

Yes, the Bane of Britain has done it again hasn’t he? Gone to Marcillat on the wrong day. Still, it could have been worse. It was a nice drive out and in any case, at least it was a day early and not a day late.

And I’d been on my travels in the night. I was in Glasgow, the funniest city in Europe (everyone who goes there comes back in stitches) organising some kind of football training, and then I’d taken the Metro with Strawberry Moose. The train was stuck in the station for a while and so, knowing that I would awaken as soon as the train set off, I allowed myself to go into a deep sleep. But before I did, I took my trousers off and hung them over the back of the seat in front. Sure enough, I awoke as soon as the train moved, and I prepared to alight at the next station. But I couldn’t find my trousers. There was a pair of shorts there but they were nothing to do with me. Of course I made a fuss and the lady driver told me that seeing as how we hadn’t reached the first stop, no-one could have alighted from the train with my trousers. However, a couple of people had boarded the train and alighted before it had set off. I carried on the argument and a couple of the passengers started to become agitated. But none of this was finding my trousers.
Ironically, I’d been reading a little about the Glasgow Underground yesterday evening and also something comnected with North-West Glasgow and the Underground, which was where all of this was going on.

My morning wasn’t wasted though, as I did two more radio programmes – or, at least, half-done them. These are the rock programmes for Radio Anglais and I’ve done the miscellaneous programmes for two more months. I just need to do the two live concerts and find a radio commentary for one of the programmes.

After lunch, I made the shelf that will fit between the door and the stud wall by the beichstuhl. And the new Bosch circular saw – nice and lightweight, it cut through a pine plank as if there was nothing there. A nice neat cut, no need to sand it down, no whining, no rattling, and the inverter showed no sign of distress. This was the best circular saw that I’ve ever used (and so it ought to be at the price that I paid for it) and if it lasts the pace (because one or two people are a little sceptical about it) it’ll be just the job.

I also cut down a 300mm plank into 2x150mm planks, and the circular saw hardly broke wind doing it. But do you remember ages ago when I told you that the 600mm pine planks were actually 605mm? Well, the 300mm planks are actually 295mm. So much for Brico Depot’s precise measuring.

I had yet another shower to cool me down afterwards (I’m having my money’s worth from the home-made solar shower) and made a mega-red-pepper-and-lentil curry for the next 4 days. I may as well start the week as I mean to go on.

-1

Thursday 25th June 2015 – I’VE NOT HAD A VERY GOOD DAY TODAY

My little circular saw has packed up today, which is something of a minor disaster. The bearings on the rotor have gone and so the blade won’t turn even though the motor is going round. And the big old one that I have from years ago, that’s not doing anything at all.

All of this is rather unfortunate as I was in the middle of trimming down the door for the shower room. The Ryobi Plus-One circular saw cut some more but then the lithium batteries went flat (no hope of the old ni-cads powering the saw) so in the end I had to fit a guide and then finish cutting it down with a rough-cut handsaw and tidying up with the belt sander.

That was all rather a shame as I was well on my way to finishing the fitting of the door. I could have had it hanging tonight if everything had gone as planned. As it is, it’s going to take a while to finish off now.

I’m disappointed about the saw. It’s a little 650-watt machine that runs perfectly off my solar power system – most of the other ones are far too powerful and consume too much energy. I’ve had this little one for quite a few years and it’s done me proud. I’m not sure where I’ll be able to find another one like it.

This morning I was up yet again before the alarm and managed a good morning on the internet. I’ve restarted the web site again seeing as how I’ve finished (for now) the radio stuff and I want to catch up, seeing as how I’ve done next-to-nothing on it for ages and there’s a lot to do.

cutting lets fitting hinges door frame shower room les guis virlet puy de dome franceOnce I’d organised that, I went off and cut the lets for the hinges into the door frame. That took ages and I had to sharpen the chisels a couple of times. This floorboarding that I’m using to make the door frames is pretty tough stuff.

And then we had the saw issues.

I’ll have to see what I can find on Saturday when I head off to Montlucon for the tiles. If there is one about anywhere, it will be in Montlucon.

UPDATE
Having a look on Amazon, there’s a 600-watt circular saw on special offer at €62:95 – and it’s a Bosch. If I’m going to have low-powered lightweight tools for what I’m doing, I’ll probably be better-off with something high-quality like a Bosch rather than a cheap generic model at half-price, and so I’ve placed my order.

It’ll be here on Tuesday. I hope that I will be too.

0

Tuesday 3rd March 2015 – I HAD A GOOD DAY …

… at work today, for a change. Although, as usual, you wouldn’t really notice.

I was up early enough and after breakfast had a good crack on at the laptop. As well as the Radio Anglais programmes, I’ve restarted work on my website again. I’ve done almost nothing on it during the winter but now Spring is here and it’s time to come out of hibernation and get a wiggle on

upper doors fitted wardrobe bedroom les guis virlet puy de dome franceIn the bedroom I spent some of the morning finishing off the second door on the upper part of the wardrobe, cutting out the lets for the hinges and fitting them, and then fitting the door handle and the magnetic catch. Once I’d done all of that, I could hang the door.

And then take the door off, file down part of the edges so that it would fit better and then rehang it.

Off to Caliburn next, to fetch another pack of floorboarding and bring that upstairs. Then I could make up a board out of seven planks, ready to cut down to make doors 3,4,5 and 6.

After lunch, I cut two strips 770mm wide out of the board that I had made. 770mm is the height of the upper doors (give or take a millimetre or two) and these two strips will form the four doors that I mentioned just now.

One of the strips I cut down to make two doors of exactly the right width for doors 3 and 4, and then fitted the reinforcing battens. I had to cut down some wood for the battens, and the table saw that I bought in Commentry a couple of months ago did the job expertly. In fact, I was running the electricity and power tools today (the circular saw, the belt sander and the table saw) until 18:40 today without significantly draining the batteries and I’m well pleased with that.

So now the two doors are ready to be hung tomorrow morning, and then I can crack on with cutting down doors 5 and 6. When they are done, there will be just door 7 to fit, and then the upper fascia panels and then I can varnish the wardrobe.

Tonight, I didn’t light a fire. 17.8°C in the attic it was, which was impressive for this time of year. I cooked tea on the single burner camping stove that I use for making coffee and as well as working perfectly (a good plan making these huge curries and packing them into individual portions – they don’t take much heating) it warmed up the place by 1°C.

On the subject of electricity, I noticed that at one stage we were having 42 amp-hours of surplus electricity. It didn’t last long but it pumped uop the heat in the home-made 12-volt immersion heater that I use as a dump load.

-1

Tuesday 17th February 2015 – I’VE BEEN ON MY TRAVELS …

… during the night and was having such an exciting time that I was determined to remember every second of it when I awoke.

Of course, you can guess what happened. I awoke and … paff … it was gone.

Ahhh well.

So this morning after something of a slow start (I’m not quite sure why I couldn’t summon up the enthusiasm) I cracked on. And much to my surprise, by the time that I had knocked off for lunch, I had really accomplished something.

home made chest of drawers bedroom les guis virlet puy de dome franceand here you are – my first ever home-made chest of drawers.

Don’t worry about the front panels by the way, they will be replaced eventually with pine planks when I have finished the wardrobe and know what offcuts that I might have left over. And they will pass in front of the wardrobe frame too, in order to hide the framework which isn’t quite straight.

Making the sides was exciting though. I had to make the first one and fit the runners in position by trial and error. And to my surprise, I only ended up 14mm out in height. And that was soon remedied with an offcut and from the outside, you would never notice.

The second side was of course so much easier, having already made the first and having taken copious notes.

The gap in between the two sides needed to be 549mm and to my total astonishment, having assembled the framework back in 2010 or 2011 or whenever, and doing it by guesswork, I had left a gap of 548mm. And what is 1mm betweem friends?

After lunch I fitted the top to the chest of drawers, fitted one of the sides of the wardrobe above the chest of drawers, and cut and shaped the piece for the back where the mirror will be. It’s all becoming quite exciting here as I progress.

But two things stick in my mind and one of them is annoying me intensely. I’ve designed the wardrobe so that the internal fitting is 500mm, meaning that I can use 500mm pine boards without having to cut them. However, the flaming, blasted, perishing 500mm pine boards are actually 505mm, meaning that I have to trim 5mm off each board.

This is a total shambles, I’ll tell you that. If there were anywhere else to go other than Brico Depot, I’d be there.

But the second thing that I have to say is based on the first thing, and this is definitely positive. That is that despite the hanging cloud that has covered us for all of the day, I’ve used the 650-watt circular saw intermittently today and you would never ever notice from the state of the batteries. Installing these new, big heavy-duty batteries back at the end of autumn was an excellent move. those old second-hand batteries would never have coped with this.

For tea tonight, I made an exciting vegan aubergine and kidney-bean whatsit. I’ve lost a load of supplies, including the macedoine vegetables and the kidney beans. I’ve no idea where these might have gone but its bewildering. I’ve had to use subsititutes and it doesn’t taste the same.

But where have these supplies gone to then? This is bizarre.

0

Tuesday 18th November 2014 – I DON’T KNOW QUITE WHAT HAPPENED …

… last night, but it wasn’t until 06:00 until I was tired enough to go to bed. The only thing that I can thinkof is the cup of coffee that I has with Liz yesterday morning at Marcillat. But surely that can’t be right. Nevertheless, something went wrong yesterday.

Even more surprisingly, I was up at 08:30 – not that I felt much like it. But anyway, there I was.

After breakfast, I set to on the battery box. All of the old breeze blocks that were in the way have now been moved, and the new breeze blocks are cemented in in the correct position. A couple of them needed to be cut and one of the joys of having these new batteries is that even in a dark, gloomy, overcast day like today, the angle grinder whizzed around them with not even a hiccup.

While I was cementing in the breeze blocks, Terry came round. He was looking for a 12mm Allen Key socket for the sump plug on his FIAT. I had to have a good search around but eventually found what I was looking for. We also spent some time having a good chat and he had a look around at the progress that i’ve been making;

I had been struggling for breeze blocks. I have dozens, if not hundreds, of 20mm breeze blocks but I had to have a good scavenge around for some 10mm ones. In the end I had to demolish the raised step into the house and so this afternoon after lunch I built a proper one out of the old stair treads from the stairs that I demolished all those years ago. The circular saw came in handy too, and once again, the new batteries earned their corn.

And tonight, I’ve finally succumbed and lit the fire in here. The temperature dropped to 12.8°C and anyway I had to cook my mega-meal for the coming week. Thsi involved moving the kitchen up here before I knocked off this evening. And I’ve also moved the camping gas stove up here too. I’ve decided that my morning coffee will be much better made up here in the warmth as the winter approaches. It’s supposed to be a bad winter this year, so they say.

-1

Tuesday 7th February 2012 – I’M MORE AND MORE …

… impressed with this new little woodstove of mine.

Almost impressed, in fact, as I am with my galvanised steel dustbin.

Last night I cooked myself the rest of the oven chips, some baked beans and a veggie burger in the oven.

Tonight though, leaving the oven open, I cooked a saucepan of pasta, beans and lentils in a kind-of curry sauce. And it’s all working really well.

And I think that I’ve found the secret of heating the room even quicker.

A nail has fallen down the back of the fire and as a result I can’t close up the ash tray completely. It’s open about a quarter of an inch. and if I open the air intake just a fraction, it roars away like nobody’s business.

Another thing that helps is having turned the divan round so that it is across the room, it acts as a heat-stop and all of the heat is concentrated between me and the fire.

And while I’m sitting on the sofa, if I prop open the lid about 30° when the fire is roaring, the lid deflects all of the heat right into my upper body.

But this morning it was cold in here – all of 8.2°C in fact.

And that’s hardly surprising because last night outside, was -16.3°C, the coldest temperature that I have ever recorded here.

It was cruel downstairs. Even the orange juice was frozen solid.

I had to go to the mairie as well to check over the projector for this exhibition I’m doing on the Trans-Labrador Highway, and Caliburn had a little struggle to start – not that I’m surprised.

Back here I made a heat pad with that heated seat pad and some insulation, and throughout the afternoon it melted about 25 litres of water. I’m now seemingly melting more water than I’m using so that’s progress of a sort.

I’ve also made much more progress doing the ceiling in the bedroom, and the unexpectred good side of this is that in moving a lot of the stuff around, I’m finding loads of things that I have misplaced. Knives, saws, the large mitre clamps, and also the missing 650-watt circular saw for which I’ve been hunting for ages.

So tonight, with having a big fire in here, it’s quite warm and so I’m off to bed in a minute.

Tomorrow I need to use some of that excess water to make some polyfilla stuff to fill the cracks in the plasterboarding that I did the other day. 15 minutes will see me finish the ceiling as far as I can go and I can’t do any more until the joints in the wall are sealed and smoothed down.

-1

Friday 20th January 2012 – I CAN’T SEE …

… a thing right now in my room.

There’s a gusting wind blowing up outside and it’s in just the right direction to blow right down my chimney so every couple of minutes a load of smoke is blown back down the fire and out of the air vent into the room.

I’m being done up like a kipper just now.

But I was right about the weather – it’s rained for most of the day. And it is indeed nice to see the rail cascading off the new roof on the lean-to onto the ground, well away from the wall, and everything inside the lean-to being bone-dry for a change.

I can’t believe my luck with the weather for that 10-day spell when I decided to go for broke and do the lean-to roof. It’s not like me at all.

So I did some sawing of the wood this morning, but a downside of this now is that I’m cutting it faster than I’m burning it and I’m now running out of room to store it. I suppose that I shall have to make a larger woodpile, or a taller one or something.

I could, I suppose, even dig the trench that I need to dig at the side of the house by the “other” lean-to, drop the drainage pipe in there that needs to go in there and connect it into the drainage system, fill the trench with gravel, cover it over with a weed blanket and then build the real woodshed where it is supposed to go, but that’s not the work of half an hour.

After the woodcutting (which I managed to do without any interruption for a change) I did some more tidying up, starting in the lean-to.

First job was to rescue the remaining Hawker deep-discharge batteries and charge them up.

And here I’ve hit a problem, in that the battery box I made for the previous batteries is too small – the Hawkers are taller. But anyway once they were out of the way I tidied up in the lean-to, collected all of the stray solar panels and stacked them in a corner, and then hung up the smaller gardening tools so that I’m not tripping over them.

Having moved a couple of solar panels out of the barn I could then get in there and make some space to put the old Rutland wind turbine tidily out of the way.

This led to the discovery of a circular saw, not the 600-watt one that I can’t find anywhere at all, but the old 1050-watt one that was all rusted solid having been left in a container that filled with water through a leak in the barn roof when I was ill and which had subsequently been partly-dismantled for spares.

Of course, now that I have a 1200-watt inverter all things are possible, so I gave the saw a good spray with WD40 and reassembled it with some other bits and pieces. And much to my surprise it fired up!

Even more surprising was that the inverter didn’t even bat an eyelid.

The saw needs some “attention to detail” before I can use it to cut wood, but this is definitely progress.

This afternoon, with the weather deteriorating, I restarted work in the bedroom – the first time for God knows how long. I’ve fitted the false beam at the side wall – the beam that hides all of the electrical cable – and I’ve also packed out one of the plasterboard panels that didn’t quite mate with the others.

It was then that I lost the light and so I spent the last hour tidying up in the barn again.

And despite all of this time that I’ve spent tidying up, a I really can’t see any difference at all.

This evening by way of an experiment, I brought a kettle of water up here and put it on top of the woodstove. And after about 2.5 hours it was gloriously warm and I had a lovely hot wash and shave in front of the fire.

Definitely the highlight of the week, that, and I can’t think why I hadn’t done that before.

Next step is the coffee pot on the stove, and put the produce in a thermos ready for the following morning.

I ought to be much-better organised than I am.

-3

Thursday 8th July 2010 – Wahey!

kwikstage scaffolding roofing sheets barn roof les guis virlet puy de dome franceYes, I now have a barn roof duly completed, complete with ridge tiles and guttering, all cut nicely to shape.

We started off this morning by bending the ridge tiles to fit before we took them up and in 45 minutes with no worries and no panic they were all fitted. I wouldn’t say “nicely” but they are all on and firmly fixed and cover up the ridge of the roof.

And then the fun began.

We coupled up an inverter to power the jigsaw for cutting the sheets but the inverter burnt out. So after some messing around we went on a tour of the local shops in Youx, Montaigut en Combraille and St Eloy les Mines for a decent heavy-duty metal saw but without luck. We then tried another inverter and the Scorpion saw but that was no better. In the end we had a brainwave – and the Ryobi circular saw came to the rescue. It badgered up the blade well and truly but it did an excellent job.

But then we realised that the roof had been cut too long and the blade was too badly damaged for another cut, so Terry fetched his huge battery-powered saw and as luck would have it the blade off my 650-watt mains saw fitted right on.

kwikstage scaffolding roofing sheets barn roof les guis virlet puy de dome franceAll that remained was to fix the guttering. We did as much of that as we could but we didn’t have an angled joint for the bend, and it was too sharp to wrap the guttering around. I can do that at a later date, or else I’ll have to invent something.

I also need to re-position one of the brackets at the end of the roof but that can be a ladder job too.

solar panels aspire recycled plastic slates house roof les guis virlet puy de dome franceOnce all of that had been done, we needed to take down the scaffolding. No reason to leave that up against the barn when it can be doing other things.

But before we did that I climbed up on the roof to seize the opportunity to take a photo of the house and the solar panels. I haven’t had a good shot of those yet. And it looks as if I’ll have to fix the guttering on the house roof before I’m much older, doesn’t it?

Now the scaffolding is down and Terry has gone and it’s all absolutely superb. I’m really impressed and a major thanks to Terry for giving me so much help and getting me organised.

Krys asked me what I intend to do in the barn when it’s finished. In fact it’s going to be for storage, a workshop for joinery and engineering projects, and a garage workshop for my collection of old cars that I can now go and rescue.

Tomorrow will be a day off as I’m whacked. And I sincerely hope it rains buckets because I’ll go outside and watch it.

And yet another solar shower this evening. I’ve abandoned (for the moment) the LIDL garden shower and am using a hand-held shower head.

-3