Tag Archives: youx

Sunday 25th July 2010 – Coming back …

red sunset font nanaud pionsat puy de dome france… from Liz and Terry’s this evening, I was just crossing over the Font Nanaud as the sun was setting. I stopped and took a few photos, as is my wont, and while most of them turned out quite well, this one is in fact quite spectacular.

I had to take it on a very fast shutter so as to avoid any blur or interference and the colours have come out perfectly, which is quite a surprise. I’m impressed with this.

I’d been round there this evening to organise our radio programme for the next few weeks. We will be talking about this auto-entrepreneur system but seeing as we only have enough information for three weeks we will also be doing something about playing football in the region. I reckon that there are loads of expats living in the area dying to integrate and not sure how – and football is a universal language.

So that’s what I was doing this morning and in the early part of the afternoon – preparation. later on I went to the brocante at Youx – quite a big one too as it happens. I bought something that indicated on it that it was 12-volt current in and 230 volt current out at 80 watts – ideal for Caliburn. But it wasn’t half a Stone-Age appliance. We started off at €10 but I got it knocked down to €3 in the end.

At Terry’s we had a play with it. We put 12 volts into it – and got nothing out. And Terry doubts that it is what it says that it is on the label. It’s not like any inverter he has ever seen.

So I dunno. I’ll add it to the stuff to be played with at a later date.

Thursday 8th July 2010 – Wahey!

kwikstage scaffolding roofing sheets barn roof les guis virlet puy de dome franceYes, I now have a barn roof duly completed, complete with ridge tiles and guttering, all cut nicely to shape.

We started off this morning by bending the ridge tiles to fit before we took them up and in 45 minutes with no worries and no panic they were all fitted. I wouldn’t say “nicely” but they are all on and firmly fixed and cover up the ridge of the roof.

And then the fun began.

We coupled up an inverter to power the jigsaw for cutting the sheets but the inverter burnt out. So after some messing around we went on a tour of the local shops in Youx, Montaigut en Combraille and St Eloy les Mines for a decent heavy-duty metal saw but without luck. We then tried another inverter and the Scorpion saw but that was no better. In the end we had a brainwave – and the Ryobi circular saw came to the rescue. It badgered up the blade well and truly but it did an excellent job.

But then we realised that the roof had been cut too long and the blade was too badly damaged for another cut, so Terry fetched his huge battery-powered saw and as luck would have it the blade off my 650-watt mains saw fitted right on.

kwikstage scaffolding roofing sheets barn roof les guis virlet puy de dome franceAll that remained was to fix the guttering. We did as much of that as we could but we didn’t have an angled joint for the bend, and it was too sharp to wrap the guttering around. I can do that at a later date, or else I’ll have to invent something.

I also need to re-position one of the brackets at the end of the roof but that can be a ladder job too.

solar panels aspire recycled plastic slates house roof les guis virlet puy de dome franceOnce all of that had been done, we needed to take down the scaffolding. No reason to leave that up against the barn when it can be doing other things.

But before we did that I climbed up on the roof to seize the opportunity to take a photo of the house and the solar panels. I haven’t had a good shot of those yet. And it looks as if I’ll have to fix the guttering on the house roof before I’m much older, doesn’t it?

Now the scaffolding is down and Terry has gone and it’s all absolutely superb. I’m really impressed and a major thanks to Terry for giving me so much help and getting me organised.

Krys asked me what I intend to do in the barn when it’s finished. In fact it’s going to be for storage, a workshop for joinery and engineering projects, and a garage workshop for my collection of old cars that I can now go and rescue.

Tomorrow will be a day off as I’m whacked. And I sincerely hope it rains buckets because I’ll go outside and watch it.

And yet another solar shower this evening. I’ve abandoned (for the moment) the LIDL garden shower and am using a hand-held shower head.

Monday 24th May 2010 – There were about 15 of us …

… including Clotilde and Heidi from the Conversation Group, who went for this tramp in the woods today. Unfortunately the tramp got away but never mind – we’ll get him next time.

coal mine abandoned pithead winding gear gouttieres puy de dome franceFirst place we were taken to was deep in the woods at the back of Gouttieres, and here we uncovered some old machinery.

It is in fact some old pithead winding gear – a winding frame of sorts and a steam engine to power it – and dates from the turn of the 20th Century when this mine-shaft was sunk to exploit the coal seam here.

St Eloy les Mines was well-known for its coal mines, as I have said many times in the past and as the quest for fuel intensified at the end of the 19th Century they started to sink shafts at the peripheral edges of the valley.

coal mine abandoned pithead winding gear gouttieres puy de dome franceThey struck a good, profitable seam at Youx and Montjoie and so they followed it right through to the edge of the plateau where the valley opens out into the valley of the Sioule.

Early indications were promising and several mines were sunk in the area between Gouttieres and Lapeize, including this site in the forest at the back of Gouttieres. They had high hopes for the area – even going to the lengths of making a huge goods yard at the railway station at Gouttieres for the trans-shipment of the mined coal.

A great deal of investment was made in the area, not just with the mine installations themselves but even dividing up farmland into tiny plots for housing for the workers, but all hopes were dashed as the coal quite literally turned to dust.

puits michelin abandoned coal mine lapeize gouttieres puy de dome franceNot one of the pits that were sunk lasted more than a handful of years. It was quickly discovered that the reserves were nothing like as prolific as everyone was expecting and there was insufficient coal to make the proposition an economic one.

Even the massive Puits Michelin at Lapeize, the remains of which can be seen in this photograph, lasted no more than 5 years. The huge area that was set aside for a slag heap rose to no more than about 20 feet high.

surface coal seam lapeize gouttieres puy de dome franceWe visited the site of 3 or 4 mines but the highlight of the visit, from one point of view at least, was finding the final outcrop of surface coal.

Here, we are probably no more than 300 metres from the Puits Michelin and this is where the coal seam ends. It just curves upwards to the surface and that is that. No wonder that it wasn’t possible to make an economic proposition of coal-mining in the area with the coal seam petering out like this.

A small amount of open-cast mining was carried out here but it was done in a very desultory, half-hearted fasion and never amounted to very much at all.

After a stop for iced water we went to look at the quarries at Lapeize.

gres de lapeize quarry puy de dome franceThe area is famous for the “Grès de Lapeize” – a hard silty millstone grit type of rock with a close affinity to sandstone and there are 5 major outcrops in the Lapeize area.

These have been quarried for centuries, if not millennia, and many important buildings in the area, including the Chateau de Pionsat, are made from the stone.

They closed down just prior to World War II but some kind of desultory attempt was made to restart them but it was doomed to failure. But in 1970 one of the quarries was bought (for a pittance) by a man from St Georges de Mons who was going to build a hotel there and he needed the stone.

old car american GMC world war II lorry  side valve - cylinder gres de lapeize quarry puy de dome franceNow Krys told me to look out for fossils (I suppose she meant something other than my fellow walkers)  but never mind that – the guy who bought the quarry took a wartime American GMC truck – 6-cylinder petrol sidevalve – into the quarry. And people say that it was fitted with a mechanical crane to scoop up the rock.

And one day he simply stopped coming and his truck is still there.

So I had a good nosy around it. It’s been robbed of many parts but its major components are still there. And it’s not a mechanical bucket on the back, it’s a mechanical prodder-type of ram-type of drill for breaking the stone off the wall and into manageable chunks.

Still, hottest day of the year so far – 34.5 degrees and the heat exchanger went off the scale – the first time since 6th August last year.

However it got off to a bad start. Being a Bank Holiday I was planning on a lie-in but not one but two phone calls shortly after 09:00 knackered that idea.

And it’s still warm now. It reached over 27 degrees in here even with all of the windows open and as I type – at 01:40 with all of the windows open and a pleasant breeze blowing in, it’s still 24.7 degrees. Summer has well and truly acumen in. Lude sing cucu, hey what?