Tag Archives: belt sander

Wednesday 24th June 2015 – MANY YEARS AGO …

… I was engaged for a short while to a girl called Liz (you’ve no idea how many people called Liz have featured in my life). It didn’t last too long, mainly for the reason that I wasn’t ready for such a commitment – and I’m probably still not ready even now.

Anyway, to cut a long story short … "hooray" – ed … last night when I was on my nocturnal ramblings, we met up again and resolved to get back together. We arranged to meet up at a park entrance somewhere but we didn’t think about which particular entrance. It was a huge park too, with quite a few entrances so I was constantly driving from one entrance to the next to see if I could find her. Also featuring in this voyage were a very old friend of mine and his wife, a woman with whom I don’t particularly see eye-to-eye. They were constantly interrupting me as I was driving around and I was starting to panic that I would never ever meet up with Liz at this rate (and indeed I didn’t)

What was strange about this is that I was reading a story last night, just before I went to bed, about a couple who had rekindled their relationship after 22 years apart. And it also brought to my mind an occasion in the mid 1990s when I had to meet someone at an Underground station in London, but there were so many exits to this station that we didn’t meet up. However, I’d given no thought at all to this ever since – until I awoke this morning.

What this couple were doing in this story I really don’t know. But it’s bizarre that these couple of events in real life should become entangled in one of my nocturnal voyages.

With all of this going on, I was up and about at about 06:50, long before the alarm went off. And after breakfast I cracked on with the radio programme. It’s all done now, all 7,000-odd words of it. 41kbs that works out at, or about 13 weeks of text discussion. That should really keep me out of mischief for a while.

door frame shower room les guis virlet puy de dome franceAs for the door frame, that’s not only started but finished (please excuse the photo – the flash on this phone-cam is not up to all that much). I cut down a couple of floorboards with the table-top saw (which struggled with this -the poor thing couldn’t quite manage properly) and I found an offcut in the barn that I cut down to give me all that I needed.

There’s a batten in there too. That’s for a shelf support as there is going to be a shelf there and that’s where the towels will live. I didn’t have a batten that size but when I installed the flying staircase down to the ground floor, I just used chevrons in a standard length for the columns without regard to what was actually needed. Cutting one down to size gave me more than enough to make the batten.

I just had to sand it down, and the new belt sander that I bought a couple of months ago did that for me.

I was so engrossed by this that I hadn’t noticed the time and it was 19:25 by the time that I knocked off. Really carried away, I was.

So tomorrow, I might have a go at fitting the hinges for the door, and then cutting the door down to fit. I’d love to have that fitted and working by the end of the week.

0

Tuesday 24th March 2015 – SO WHAT …

… have I done today then?

First thing was to trim off a corner of the door that is catching on the floor. And having done that, it was then catching somewhere else. It seems that I have a warped floorboard and that is what is causing the door to catch.

The solution was therefore obvious – out came the big new belt sander and that soon dealt with that issue. There was a lot of vacuuming to do with the new vacuum cleaner, but that’s impressive too. There is however a design fault – a 90° bend in the pipe inside the machine that leads into the dust bag. That could easily be eliminated and so it should be, because it blocks up quite easily.

Next job was to fit the beading around the window and the framework for the sheet of glass that will be fitted above the door.

I had to sort out the issue of the flooring in the far corner. The walls are of course nothing like straight and there’s a gap that varies from about 15mm to 3mm. I tried to carve a piece to fit but gave up after half an hour. Instead I went into the barn and found a 4.5m length of 20mm x100mm left over from when we did the barn roof. I trimmed that down to 70mm using the desktop saw, and that will do to pad out the skirting board so that the gap is covered.

I then spent the rest of the morning vacuuming and cleaning up.

After lunch I masked off by the window and then started to varnish. I’ve done the window sill and insets and also the interior of the wardrobe and that took until all of 19:00. And I’ve had a bit of a shock in that I’m not going to have anything like enough varnish to do it all. A trip to Montlucon is therefore on the cards, well before my planned trip on Saturday.

I had a fire in here tonight. It wasn’t that it was that cold, but it was cold enough and it meant that I could cook my meal in comfort. It was left-over hot-pot from Sunday night – Liz gave me a doggy-bag. Not enough for a meal but with a handful or two of pasta thrown in, it made a lovely meal.

And now I’m off to bed – a nice early night.

-1

Tuesday 17th March 2015 – THIS IS PROGRESS

hanging door bedroom les guis virlet puy de dome franceHere we have a door, now hanging nicely in the doorframe of the bedroom.

This morning I removed all of the masking tape and then wired up all of the electrical sockets in the bedroom (and that was something that took much longer than I anticipated too).

No bread at lunchtime, so I went into Pionsat to see the boulangère but it seems that they are exceptionally closed for the week. So that was that – I ended up having to go to the Intermarché.

And so after lunch, I attacked the door. I had to cut off about 20mm off one side to make it fit, and then I cut the lets in for the hinges. Much to my surprise, the door fotted perfectly for most of its length and width, but it was catching in places where the frame on the wall seems to be bowed.

And that was where the new belt sander fitted in. It earned its keep here, that’s for sure, sanding off where the door was tight. And in position too – it’s not that easy taking he door off, lying it flat on a surface, marking it off and then cutting off the excess. The belt sander did it in seconds.

fitting lock in bedroom door les guis virlet puy de dome franceI still had enough time to start on fitting the door lock. That’s 10mm wide and 60mm deep and so with the aid of an auger, I drilled into the door jamb as necessary. Tomorrow, I’l chisel it out to fit the lock and then drill through for the handle and key.

I’ll also fit the lock plate on the door frame, and then fit the battens to stop the door pushing through.

When that’s done, I can start to empty the room ready to do the flooring.

-1

Tuesday 3rd March 2015 – I HAD A GOOD DAY …

… at work today, for a change. Although, as usual, you wouldn’t really notice.

I was up early enough and after breakfast had a good crack on at the laptop. As well as the Radio Anglais programmes, I’ve restarted work on my website again. I’ve done almost nothing on it during the winter but now Spring is here and it’s time to come out of hibernation and get a wiggle on

upper doors fitted wardrobe bedroom les guis virlet puy de dome franceIn the bedroom I spent some of the morning finishing off the second door on the upper part of the wardrobe, cutting out the lets for the hinges and fitting them, and then fitting the door handle and the magnetic catch. Once I’d done all of that, I could hang the door.

And then take the door off, file down part of the edges so that it would fit better and then rehang it.

Off to Caliburn next, to fetch another pack of floorboarding and bring that upstairs. Then I could make up a board out of seven planks, ready to cut down to make doors 3,4,5 and 6.

After lunch, I cut two strips 770mm wide out of the board that I had made. 770mm is the height of the upper doors (give or take a millimetre or two) and these two strips will form the four doors that I mentioned just now.

One of the strips I cut down to make two doors of exactly the right width for doors 3 and 4, and then fitted the reinforcing battens. I had to cut down some wood for the battens, and the table saw that I bought in Commentry a couple of months ago did the job expertly. In fact, I was running the electricity and power tools today (the circular saw, the belt sander and the table saw) until 18:40 today without significantly draining the batteries and I’m well pleased with that.

So now the two doors are ready to be hung tomorrow morning, and then I can crack on with cutting down doors 5 and 6. When they are done, there will be just door 7 to fit, and then the upper fascia panels and then I can varnish the wardrobe.

Tonight, I didn’t light a fire. 17.8°C in the attic it was, which was impressive for this time of year. I cooked tea on the single burner camping stove that I use for making coffee and as well as working perfectly (a good plan making these huge curries and packing them into individual portions – they don’t take much heating) it warmed up the place by 1°C.

On the subject of electricity, I noticed that at one stage we were having 42 amp-hours of surplus electricity. It didn’t last long but it pumped uop the heat in the home-made 12-volt immersion heater that I use as a dump load.

-1

Wednesday 25th February 2015 – BACK TO WORK TODAY

And I didn’t feel much like it either. A late night last night and the battery going flat in the mobile phone that I use as an alarm clock meant that I wasn’t awake as early as I would have liked, and I crashed out for half an hour at lunchtime too.

Once I actually started work (about 20 minutes late) I cracked on – or so it seemed – but despite working consciensciously throughout the day, I haven’t made all that much progress and I don’t know why.

The story of my life just recently, I’m afraid.

door hanging wardrobe bedroom les guis virlet puy de dome franceI cut the second door of the wardrobe down to size (and much to my surprise, the width is millimetre-perfect), sanded off the edges with the new belt sander, did the lets in the door and the frame for the hinges and fastened them, and then hung the door.

Once it was in place, I fitted the handle, fitted the door lock and drilled out the hole for the key, and fitted the magnetic catch.

That took me nicely up to something of a late lunch and I went off upstairs for a little doze

After lunch, I rooted out another couple of packets of floorboarding (and also found the strips for the shelving supports for the inside of the wardrobe – I knew that I had them somewhere) and then made the sheet of planks from which I’ll be cutting out the doors for the other half of the wardrobe.

I also made the framework for the doors and that took me to 18:30, so having more-than-recovered the time lost due to my late start, I called it a day.

For tea, I cooked a mega-pepper-and-lentil curry that’s now divided up for another three meals, and now I’m off to bed.

I’ll be carrying on with my doors tomorrow – I wonder how far I will get.

0