Tag Archives: circuit breaker

Sunday 27th July 2014 – NOW HERE’S A THING …

coffee machine working les guis virlet puy de dome franceI actually had a coffee percolator running here – all 850 watts of it – and it’s the first percolated coffee that I’ve ever made here with my electrical system. We are definitely making progress here.

WHen I turn the clock back to 2008 and the abuse and insults that were heaped upon me, all behind my back – in a public discussion forum by a so-called friend of mine when I talked about running a microwave oven here, well, the coffee machine draws the same current as a microwave and run for about the same length of time. I’m totally convinced that a microwave will run here and if I can find a cheap second-hand one as a test bed, I’ll be giving one a try.

Mind you, I did have a problem with the main circuit breaker tripping out as it has done on a few other occasions too. But this time, I was there when it happened and I could see exactly what was happening and it’s left me with a bit of omelette sur le visage. When I set up the system originally, I had a 600-watt inverter here. Consequently I wired a 75-amp circuit-breaker into the system, which was more-than-enough. Since then, I’ve installed a 1200-watt inverter and I seem to have … errr … forgotten to uprate the circuit-breaker.

Of course, 75 amps is the equivalent of about 950 watts and when I have the fridge running and a few other things besides, then a 850-watt coffee percolator is expecting rather too much.

Apart from that, I had a nice lie-in this morning, until 10:45 too and about time. And after breakfast I had a few things to do and then after lunch and the incident with the coffee machine, I did some shopping on the computer to buy the stuff for the Sankey Trailer and also some ink for the Hewlett Packard printer that I inherited. And that wasn’t as easy as it sounds either. I tried about 4 different cards before Paypal accepted one of them and to my surprise, it’s the one from the little rural bank here. None of the multinational cards word work.

I should also have ordered a new circuit breaker or 6 while I was at it but I forgot.

Anyway, that’s the end of the weekend and I’m back to work tomorrow.

Friday 21st August 2009 – YOU CAN SEE IN THIS PHOTO …

battery box control panel les guis virlet puy de dome france… why it is that I need to move the batteries. They are blocking up the front door. And if I’m going to start some kind of serious work inside, I need the front door off so that I can bring messy stuff in that way rather than in through my little room.

Today, I put a row of breeze blocks down on the concrete base that I laid yesterday. I can’t build it right up as just right now I don’t know how high the suspended floor is going to be. But tomorrow I’ll be putting a layer of 40mm polystyrene on the base and around the sides, and dropping 10 batteries (thats 920 amp-hours in total) in there.

I’ve also started building the control panel as you can see. There are three charge controllers on there right now. From right to left, we have the charge controller for the 2nd bank of solar panels (the one for the first bank is currently nailed to the front door and will be moved onto the control panel in early course), then in the centre is the charge controller for the wind turbine, and on the left is the charge controller for the overload.

In case you don’t know, when the batteries are fully-charged the charge controllers shut down the charging circuit. And that’s a waste of energy. So what I’m doing is having an overload controller that will divert the surplus current into a “dump load” – in this case a 12 volt water heater element. So that way I’ll have plenty of hot water.

There’s also a bus bar or two on there. These are for connecting loads of heavy duty wires and cables together. Bus bars range from sophisticated professional jobs down to flattened copper pipe and self-tapping screws, but for many years now I’ve been developing the “ring terminal onto long bolt with butterfly nut” and it works just fine, so there’s no reason to change.

There will be a few other things on there too, like a mains inverter, a couple of clocks, some circuit breakers, a fuse box and all that kind of thing. Here is one I made earlier, but that has undergone considerable … er … modification since then.

And what do you think about the wallpaper in the house? The house as you know is built of stone and they plastered over it on the inside, and then put up some wallpaper of … er … stone. Why didn’t they just knock the plaster off?

Meanwhile, back at the ranch, Claude’s son came round this afternoon. he’d been rummaging around in one of his dad’s many sheds and came across a trailer board.

Well, a sort-of trailer board. The lenses on the lights were smashed and all the cable was missing but I cleaned it up, cleaned all the contacts and rewired it, and now there is in theory a working trailer board. I say “in theory” because there are no bulbs either but I have a 12-volt piazzo tester and when I connected it up to the contacts for the bulbs it did what it was supposed to do at the time it was supposed to do it.

So all Pascal needs to do now is to buy some lenses (they are “standard trailer – small” and some bulbs, attach it properly to the rear of the caravan, and there you are.

I checked and adjusted the brakes on the caravan too and during the course of the evening I learnt that
1) The caravan is over 40 years old
2) Pascal has never towed a trailer (or indeed anything, for that matter) before.
All I can say is “good luck” to him, taking that over the “Cote de Maille” between Puy-en-Velay and Montelimar at night.