Tag Archives: voltige

Tuesday 3rd August 2010 – We cracked on with this roof …

fitting slates guus lieneke roof les guis virlet puy de dome france… today.

First thing that we did was to fit all of the laths, and it was far easier doing that this morning that it was trying to do it last night when all of the cement was still wet.

Once the laths were on we had to fit the voltige in between them. This is very thin wood and it is designed to stop snow and the like penetrating underneath the slates. Snow of course is a real issue round here in winter. Personally, I wouldn’t have gone for the voltige. Under my slates, as keen readers of my outpourings will know, I have sheets of waterproof plywood and you simply nail the laths on top. It’s much easier but then again this isn’t my roof. And of course we did my roof from scratch – here  we are trying to match it to whatever is there already – and has been there for probably 100 years – but that’s not an easy job.

Once the laths were on we refitted the tiles. And as we have extended the roof we didn’t have enough of course and this led to Yours Truly grubbing around in the undergrowth unearthing another 20 or so.

Tomorrow we need to fit the half-tiles to the edge and trim where necessary with the angle grinder, then a demi-chevron to support the edging tiles, then fix the edging tiles, then cement them in place, then fix the ridge tiles and finally fix the crown. Once all of that is done the rest of the chimney needs re-pointing and that will be that. It will then be time for phase two.

roof collapsed lean to les guis virlet puy de dome franceAfter Terry had gone home I carried on with the flooring in my lean-to. There was a strip of about 140mm that needed doing and luckily I had some lengths of 70mm left over from a previous project and so I used them.

You can see fairly well the hole in the floor. There will be a hatch there that will open upwards, with a set of stairs going downstairs. That’s much more civilised than having to shin up the fence and climb in via the window. It’ll look pretty good in here once I can sort out a tarpaulin to go over it where there is no roof as yet.

But if we finish the roof on Lieneke’s house pretty quickly and Simon comes to give us a hand with phase II then it won’t be much longer until I can crack on in here on a permanent basis.

-2

Monday 2nd August 2010 – We talked about the rain.

And I can tell you with complete confidence that in the 18 hours from about 14:15 to 08:15 this morning we had a total of 42mm. Now that is not all that far short of a record, and it gives you some kind of an idea of what kind of weather we had just now.

The morning was dark and miserable – at about 10:00 I was getting a total of about 2 amps of my charging system, a right winter’s day type of charge. Mind you this afternoon it brightened up considerably and it was quite warm. But it didn’t last and as I was leaving Pionsat after the Anglo-French group meeting we were having torrential rainstorms again.

sunset rainstorm heavy cloud les guis virlet puy de dome franceAs I turned up the lane to here I noticed the sun setting between two heavy rain clouds and so I quickly took a pic. I didn’t have much time to set up and what with the driving rain it’s not come out as well as it might.

But it’s impressive just the same and I’m getting to like this new Nikon D5000 camera. And that’s just as well, considering the money that I spent on buying it. I’d be disappointed with anything else.

We managed to get a load of work done on the roof today in between the rainstorms. All of the chevrons are on and they are bricked in and cemented into position. It looks quite impressive. Tomorrow we can add the laths and the voltige and put the tiles back on, that is if the weather lets us. It’s looking pretty ominous outside there right now.

roof collapsed lean-to fitting new beams flooring les guis virlet puy de dome franceAfter we knocked off on this roof Terry came to give me a hand in this lean-to for 10 minutes, for which I was grateful. We took out the collapsed beam and fitted the new one, and then fitted the other new one into the beam hangers against the wall.

After Terry left I had a root around upstairs in the barn and came across some 25mm planks. They are now fitted and you can see the hole in the floor where the stairs will come in from downstairs.

Once the floor was fitted I roofed the place over with a pile of corrugated iron sheet that I have found over the years in various places. I have some others but they are underneath firewood, gravel, hardcore and the like, preventing that from being infiltrated by weeds. I looked out for a tarpaulin but the only one I could find was a 6×4 meter and I don’t want to waste that. I’ll have to buy another 4×2 metre that should do, and I’ll need a thin piece of 25mm to fit against the wall.

And I was carried away doing that and so almost missed the start of the Anglo-French Group meeting tonight. That shows you how keen I was.

-1

Friday 23rd July 2010 – I went downstairs this morning …

… and found a mouse dying in the kitchen! My cooking isn’t that bad, you know. Anyway, I heaved it outside to join into the food chain and waited for Terry. He had gone off on a tour of sawmills to find some of the specially-shaped wood for hanging these tiles and so I carried on with some weeding.

When Terry turned up he didn’t have the wood because it’s no longer sold. Apparently it’s a fire risk but having seen last year how quickly ordinary household products catch fire some kind of fire restriction is totally unnecessary.

We started to cut the laths and voltige to cover this roof and made a start on fitting the tiles. With good weather we could have fixed them all on but it was not to be. We were having rainstorms every 10 minutes and they kept on driving us off the roof into shelter.

After Terry went home I sowed some more beans and peas and that really was my day. Tomorrow is shopping, Sunday is rest and then we are back at it on Monday.

-2