Tag Archives: sawmill

Tuesday 26th November 2013 – I’VE RESTARTED WORK TODAY

First time since last Thursday too. But there were a few housekeeping jobs that needed to be performed first, including emptying the composting toilet – a gruesome job.

Once that was out of the way the next stop was Pionsat where I needed to post an important letter. And then off to the sawmill at St Gervais for my wood. 21 laths and 12 demi-chevrons of 4.5 metres. The laths are for putting the insulation on the walls outside here – a job that I’ve been meaning to do for a while, and the demi-chevrons are for making the shelves that I want. I have 9 or 10 shuttering planks that I bought in Brico Depot the last time that I was there. They will get me going for the actual shelves but I really need a huge pile more. I won’t be getting them this week as I have a “minder” job to do on Saturday which means only local shopping again.

Back home, I made a start on building my woodshed. For that, I’m using the old chevrons off the house and barn roof. I put them aside specifically for work like this, but some of them are in worse condition than I imagined. Not that that is too much of a worry because what won’t be any good for building will be plenty good enough for burning and you can never have too much firewood, especially if you have somewhere to store it.

Anyway, I’ve selected all of the wood that I need and I’ve almost assembled one side. I’ll finish that tomorrow and then make the seond side, after which I’ll need to dig the holes to plant them into the ground and concrete them in place.

If I can do all of that, this will really be progress with a capital P.

-8

Thursday 11th July 2013 – WELL, THE ANGLE GRINDER …

… idea worked just fine.

Mind you, I had to strip it down, remove the safety guard and the side handle, and fit a worn-down diamond disc. Then I could just about get the thing in the hole that I made.

Although it took ages to work out the best way to use it and how to control it, I managed to carve a deep groove into the head of this stubborn lump of ironstone.

The SDS drill, in the stationary position and with a chisel attachment, fitted some way into the hole (after I’d stripped all kinds of surplus stuff off the drill) and after several good poundings I knocked a lump off the rock.

And that was how I proceeded – cut a groove in a lump of rock with the angle grinder, pound away with the SDS chisel, and then use the core drill until it grounded out again.

hole in wall shower room les guis virlet puy de dome franceIt took ages too and then of course eventually the angle grinder and the chisel bottomed out and that was that.

But I did find a 500mm 22mm SDS drill and so I used that to punch a whole row of holes, rather like perforations, around the groove made by the core drill. And at about 16:30 this afternoon I broke through and that was that;

Now the pipe is in place, cemented in from the outside and with the filter fitted. It’s mostly filled from the inside but of course the air vent and fan won’t be fitted until the tiling is done.

While I was waiting for all the cement to dry, I had a little (yes, just a little) tidy up in what will be the bedroom and I found loads of stuff that I had been looking for. But now I’m whacked, and that is that.

But back to this morning.

Cécile and I were up early and loaded her car with all of the stuff she’s taking to her mother’s, which was uite a considerable amount.

I then ran her into St Gervais d’Auvergne to post a letter at the Post Office, where we ran into the guy who runs the sawmill. It’s always closed in July and August while he does the harvest, but he did mention that he had a workman down at the mill just then.

Upon hearing that news, I took full advantage and came back with a load of demi-chevrons.

A really good investment, Caliburn’s roofrack.

So now Cécile has left the area, probably for good, and I’m back here making rapid progress now in the shower room.

What’s going to happen next to jam a spanner in the works?

-7

Friday 2nd December 2011 – IT’S FRIDAY …

… but it’s not Five o’clock, and it’s not Crackerjack either. But it is the last Friday that I’ll be spending here for a week or two. I’m hoping to go to the UK at the end of next week.

And despite having gone to bed quite late last night, that didn’t stop me being wide awake at about 07:00 this morning. This sleep thing is becoming ridiculous.

Liz and I arrived at Radio Arverne’s place in Gerzat at about 10:40 for our 11:00 appointment and eventually it was about 11:47 before we started recording.

We did the four Radio Anglais programmes for December and then Bernard sprung it on me. Would I write another Christmas Special for an hour, to be broadcast in … errrr …. 2 weeks time?

I shall have to get my finger out, won’t I?

We got back to Sauret-Beserve 20 minutes late after all of that and I shot off to Montel-de-Gelat and the sawmill to pick up a load of timber.

I had to wait around there for ages as well as they didn’t (despite what they said on the ‘phone) have any treated wood so they treated it while I waited, and that took ages too.

And while I was there I was chatting with the staff and it turns out that the office girl is the wife of the Montel goalkeeper whose photo that I took was published in the paper the other week, and the office manager plays for Pontaumur and one of my photos of him scoring against Pionsat was published a few weeks before that.

There were two clients there from Pionsat too. One of them had an old Transit pick-up that was clearly custom-made. A PTAC of 3.3 tons for a start – that’s impressive. And he had so much wood dropped in it that it was sagging right down at the back end and he crawled all the way back to Pionsat at 40kph. 

And when I returned home and unloaded my wood I realised that I had forgotten the demi-chevrons that I need to finish off the greenhouse.

D’ohhhh.

And so I went upstairs and crashed out for a while instead.

-2

Thursday 12th May 2011 – How long is it…

citroen wood burning gas lorry st gervais d'auvergne puy de dome france… since I featured an old vehicle on my blog? I can’t remember now but it may well have been about a year ago, and it might have been a Citroen lorry. And so here’s another old Citroen lorry that I saw on Thursday.

Now despite the fact that it’s a rare-enough lorry as it is, this vehicle is practically unique and there probably won’t be another one quite like this anywhere that would be still running on the road.

citroen wood burning gas lorry st gervais d'auvergne puy de dome franceDo you see what looks like a boiler at the side behind the cab? That had me puzzled for quite a while and I thought at first that it was a tar-spreader.

I ruled that out though because the jets are in front of the truck, meaning that to do its spreading it would have to travel in reverse while it was working and that wouldn’t be very likely.

citroen wood burning gas lorry st gervais d'auvergne puy de dome franceAnd then the penny dropped. We are at a sawmill, aren’t we? Yes, and what this is is a lorry that runs on wood-gas – like they did in the war when there was no petrol. And he was here to fuel up with his wood chippings because, astonishingly as it might seem, he still runs it on wood-gas.

The owner had gone off to chat with his friends otherwise I probably would have been still there now chatting to him. But it’s a good job that I had to go out – I would have missed this lorry otherwise.

home made balloon frame greenhouse les guis virlet puy de dome franceAfter the customary couple of hours on the web pages I went out and carried on with the framework for the greenhouse, but I didn’t have enough chevrons. In fact, doing a considerable bit of mix-and-match, I was just 10 cms short.

So after lunch I had a good root around here, sorted out a pile of stuff for the dechetterie at Pionsat (there were four dustbins full of tin cans), went down there to dispose of it, and then went to the sawmill at St Gervais for some wood.

And it was at the sawmill that I saw the lorry.

-1

Friday 14th January 2011 – Ouch!

It’s been an expensive day today – and I didn’t go shopping either. GRRRR What did happen was that the postie came by today bearing some major bad news.

Firstly, when the solicitor charged with handling the sale of Reyers was asked to settle all of the outstanding Brussels taxation issues, well, indeed he did. But he did that on the 29th of September, the day that the cheque for the sale was cleared, and of course the property taxes on Expo were due on October 1st. And so I had a red reminder today for €1200 that I had not taken into account in my budget.

Secondly, a couple of years ago I went into the taxation office here and asked that the taxes that I am to pay on Les Guis and on Montaigut should be paid by direct debit instead of by demand. I told the tax office that I travel around a great deal and was afraid of missing a payment or two, and the tax office very kindly helped me to complete the forms.

And when I went into the tax office that time, I was brandishing around a tax d’habitation form. And so you can guess what has happened. Just how many brain cells do you need to have, to work out that if someone tells you that he travels around a great deal and is afraid of missing a payment or two, he means ALL HIS TAXES? And so that was another €733 that bit the dust.

While I was out, I reckoned that I may as well go and buy the plank that I need for making my false beam, the one that the electric cables will be running behind. So to St Gervais and the sawmill. And he will cut me a plank of the required width and thickness, but to a maximum of 4.15 metres. That’s no good. The room is 4.47 metres and the plank of course needs to be in one piece – it will look silly as a beam if it is in two pieces.

And so I shot off through the wilds to Montel-de-Gelat and the huge sawmill there. And I arrived about half an hour before closing time. They have planks in stock – 4.50 metres long by 18mm thick. Absolutely ideal for what I want. But the width – 150mm whereas I want 120mm ideally.
“Can you trim one down for me?”
“No”
“No? Why not?”
“Because this is the week when the cutting mill is closed for machine maintenance.We can do it for you next Friday”.

I’m clearly having no luck at all today.

wood pile lean to les guis virlet puy de dome franceI said the other day that I would take a photo of the lean-to with all of the wood. It looked like this in November last year, and all through the following 12 months the pile increased in size as I flung more and more bits of wood in there.At one stage in the summer I couldn’t even get into the place. But anyway, you can see that it’s emptying out quite nicely.

The wall on the left is the eastern wall of the house and the kitchen will be built against this wall. The dark grey cylinder is the large gas bottle that will power the gas cooker. I’ll anchor it to the wall and drill through the wall in order to pass a gas pipe through. The other cylindrical object is an old immersion heater that Claude gave me to play with.

In the bedroom I did some more of the tongue-and-grooving but that came to a dead stop too as I ran out of 20mm insulation. I’ll have to go to Brico Depot tomorrow and buy a load of that so that I can carry on next week. There’s not much else I can be doing until I buy my plank.

-1

Wednesday 12th January 2011 – Well, we are still progressing …

plasterboard insulation bedroom les guis virlet puy de dome france… slow as it might be. You can see in the pic that I’ve fitted 2 of the strips to the front wall, all with the castellations nicely cut out, and the joints all properly filled in. It took me hours, as you might expect, as I don’t really do finicky, as I said yesterday.

I haven’t fitted the third strip as this depends on the 4500 x 100 plank that is to go as the false beam on the right-hand wall. I really need to go to the sawmill and sort that out, as well as picking up a pile of 40×27 laths.

What the plan is for tomorrow is to make a start on the ceiling – cutting some tongue-and-grooving to fit between the beams. I won’t be able to do much as I don’t have any 20mm insulation sheets. I forgot to get some last weekend at Brico Depot, but whatever I do will at least give you an idea of how it’s all going to work. As I say, slow progress but it’s progress all the same and It’s looking a little more optimistic here. I might even have a bedroom for the summer!

That is, of course, if we ever get any summer. For the last 2 days it’s poured down with rain more-or-less non-stop and working outside for the last half-hour before I knock off (the days are lengthening) is getting me soaked to the skin. But at least you can see a little improvement at the outside of the house – the place is slowly starting to look a little tidier. And there’s more space in the lean-to since I’ve been burning the wood in there. All in all, I’m feeling a little more optimistic.

-2

Tuesday 11th January 2011 – I made some slow progress today

The plasterboarding on the two outside walls in the bedroom is only up to 2.50 metres whereas the room itself is about 2.78. What I’ve done in the gaps is to run all of the conduit and trunking for the electric cables, as you may have already seen. For the side wall, I can make up the difference by building up with some plasterboard strips and then put a plank of 4.50 x 10 over the trunking so that it looks like a beam (the real outer beam is of course hidden in the 80mm of insulation on the wall).

But a big hunt around didn’t uncover a suitable plank and so I need to go to the sawmill, unless anyone has a suitable beam lying around anywhere. Of course I could use two smaller planks but it would look silly. Whoever heard of a beam with a join in it?

electrical wiring bedroom ceiling les guis virlet puy de dome franceFor the front wall I’ll be using plasterboard with 20mm of insulation behind it and cut to a castellated shape to fit between the beams. And so today I’ve been fitting the longitudinal laths between the beams so that I can infill between the beams with tongue-and-grooving to hide the 60mm of insulation there, and then I fitted some stand-off brackets on the front wall to take the plasterboard. This is all very finicky work and as you know I don’t do finicky and so it’s really slowwwwww. But it’s progress all the same

I’ve also made a change at the top of the stairs just here. I had a huge old cardboard box that I had opened out and used as an insulated wall covering, to cover over the back of the plasterboarding into my attic (I can’t cover it properly as I’ll be running the water pipes down there in due course). But a bit of measuring up revealed that the offcuts of the space-blanket insulation from when I did the walls of the bedroom – they would be a perfect fit and so I took the box off and redid it. And it’s cut down all the draughts that came in through there. But the firewood doesn’t like it and just now one of the boxes of firewood went crashing down the stairs decanting its contents all over the place.

This afternoon I braved the Hound of the Baskervilles and went round to Bill’s. He had a 100-litre immersion heater that was fairly new and which he was giving away to a good home. It has a slight leak around the electriclty plate, but that’s no problem for me as I’ll be taking it off anyway and fitting my own with one of my 12-volt elements.

He also had a small 50-litre immersion heater as well that was looking for a good home. And that got me thinking. Heater elements are what is known as “resistance elements” and so will work with any kind of voltage. And so with 50 litres, which isn’t a lot of water but more than I ever need, I could use it as the dump load for the set-up in the barn and run my 12-volt surplus current into it directly. With the element rated at 220 volts and with me putting 13.4 volts through it, I’d be getting only 0.06 of the power output (if the element is rated at 1200 watts I’d be getting about 75 watts – if it’s rated at an unlikely 3kw I would be getting about 180 watts) but 50 litres in a proper insulated tank won’t need all that much power to warm up. What I will need to do is to find a way of fitting a temperature sensor in there so that I can keep an eye on the temperature.

Of course, it might not work. But the whole idea is that it’s an experiment and we can see what happens.

But I had a bad night last night. I woke up at about 04:00 with a nightmare (a long time since I’ve had one of those) and I couldn’t go back to sleep afterwards. I’ll be having an early night.

-1

Wednesday 1st December 2010 – THIS WEATHER DIDN’T IMPROVE ANY TODAY.

heavy snowfall les guis virlet puy de dome franceI woke up to find snow everywhere – a good 6 inches must have fallen through the night and the temperature stayed below zero all day.

I was getting low on water in the verandah so I had to hammer my way through the ice in the water butts – the tap was frozen solid. Definitely a good idea it was to fasten the top onto the butts with wing nuts rather than screws.

wardrobe bedroom les guis virlet puy de dome franceAfter the customary chopping of a bucket load of wood to replenish the stocks up here I carried on with the wardrobe.

And I’m definitely sick of Brico Depot wood. The horizontals I made out of the left-over demi-chevrons from the roof – those that I bought from the sawmill – but the Brico Depot demi-chevrons I was using for the uprights – they just split and collapsed. It’s the sawmill in future for me for my wood.

Much of the wardrobe is done but I ran out of light and so I went into the barn and carried on tidying up the wood that used to be the laths off the barn roof. The long bits or those with decent ends I’m saving at the moment but there are also tons of short bits or broken-off bits. I moved a few bucket-loads of those down to the lean-to where I’m keeping the wood that I’m burning. I’ll cut those up tomorrow morning and add them to the pile.

Yes, tomorrow. I can’t see me going anywhere tomorrow. I’m properly snowed in here and there’s no sign of a snow plough.  

-1

Friday 23rd July 2010 – I went downstairs this morning …

… and found a mouse dying in the kitchen! My cooking isn’t that bad, you know. Anyway, I heaved it outside to join into the food chain and waited for Terry. He had gone off on a tour of sawmills to find some of the specially-shaped wood for hanging these tiles and so I carried on with some weeding.

When Terry turned up he didn’t have the wood because it’s no longer sold. Apparently it’s a fire risk but having seen last year how quickly ordinary household products catch fire some kind of fire restriction is totally unnecessary.

We started to cut the laths and voltige to cover this roof and made a start on fitting the tiles. With good weather we could have fixed them all on but it was not to be. We were having rainstorms every 10 minutes and they kept on driving us off the roof into shelter.

After Terry went home I sowed some more beans and peas and that really was my day. Tomorrow is shopping, Sunday is rest and then we are back at it on Monday.

-2

Friday 18th June 2010 – One of the major advantages …

caliburn caravan chassis trailer les guis virlet puy de dome france… of having a trailer is that you can buy a huge load of wood all at one go and move it back home without any problems.

It might have cost a fortune in tyres but I shudder to think of how many loads to Brico Depot, at 70kms per round trip, I would have had to have made instead of just one trip to the sawmill at St Gervais d’Auvergne.

The wood is much, much better quality than at Brico Depot, and about 60% of the price too. Mind you, he cottoned on that he had underquoted me so I replied “well I did try to tell you the other day”. And as a reward he heaped on a few more demi-chevrons.

I’ve had good value from the sawmill and I’ll be going back there again.

The trailer pulled nicely with this load on too. Although the trip back was slower, Caliburn never struggled at all, not even going over the Font Nanaud.

Once I’d unloaded the trailer I had to take it back to Terry’s. They have finished with the scaffolding on that chantier and it needs collecting. I’m busy now until Tuesday so Terry will take the trailer round there and load it up and then either he can bring it here next time he’s passing or I can collect it next time I’m passing.

It’s a really useful idea having a trailer.

And the weather? Only 4.5mm of rain today and I’m running out of dry clothes.

-2

Monday 14th June 2010 – This is a significant photo …

hardstanding caliburn parking les guis virlet puy de dome france… and for two reasons. Firstly, it’s the first pic of Caliburn in his new home. At lunchtime I took him for a drive on the new hardstanding to flatten it down a bit. But the ground hasn’t dried up enough (and it’s still p155ing down now) so it’s no surprise that at one stage he bogged down. But I was expecting it and I had the chain winch ready.

It’s also significant in the respect that it’s the first pic with the new Nikon D5000. I was in fact all ready to use the Pentax K100D but the battery was flat and the ones on charge wouldn’t fire it up. So it seemed to he the right time to fire up the Nikon.

But never mind being bogged down – this was one of those days where problems seemed to come along in droves. After Terry came round for some of my scaffolding poles, I went into Montlucon to pick up these tyres for the trailer – and I had a puncture.  Then of course there was the bogging-down, and then on the way to St Gervais d’Auvergne I got stuck behind a circus convoy – “Showman’s Goods” as they are described in British Road Traffic Law or “Les Forains” as they are described over here. So it was 30kph (if we were lucky) all the way there.

And at St Gervais d’Auvegne I’ve ordered all my wood. The guy in the sawmill has undercharged me, and I pointed that out to him (I don’t believe in taking advantage of small businessmen – I wouldn’t like it if someone did that to me) but he insists that he’s right. But €126 for one thing and €99 for another and then a few other bits and pieces will never ever make €167 no matter how hard anyone tries to make it.

st gervais d'auvergne birdwatching centre ornithologique puy de dome franceOnce everything was sorted out in St Gervais d’Auvergne the next stop was to Liz and Terry’s to fit the wheels and tyres on the trailer.

The route as usual took me past the birdwatching centre at the back of town, which is my favourite spot for photographing the Puy de Dome. Now that I have the new Nikon D5000 I can take a pic from here and compare it with one of the photos taken with the Pentax K100D and we can see if there’s a difference.

Terry was out earning some folding stuff when I arrived and so I put the new wheels on the trailer and then helped Liz with some weeding.

Now we are all ready for moving this tractor tomorrow. What with all of the effort we’ve put into it, I hope it all goes according to plan.

0