… next Monday. I had completely forgotten about it and so I need to get a wiggle on. It’s a good job that I had a few days on it earlier in the month in order to get ahead, otherwise I would be starting to struggle right now.
Consequently this mornng, I sat down and dashed off another 2000 words for our next hot topic. That makes about 25kb, which is about 5,000 words and at about 3kb per 5-minute segment, this is enough for 8 weeks. There’s plenty more where this came from too so with a bit of luck, God’s help and a Bobby, this might do until I return from Canada, with what is already in the pipeline. It means that I just have to do the additional notes and the dialogue for the rock music programmes.
At midday I reckoned that I had done enough for today and so I went into the shower room and measured up the inserts of the window frame in order to cut some plasterboarding. That wasn’t as straightforward as it might have been either. I mentioned the other day that with the house being an old fieldstone house, nothing is plumb and the walls are not parallel. It’s all kinds of shapes and so was this plasterboard that I had to cut. And I didn’t have any pieces long enough so I’ve had to join a couple of offcuts on either side;
I fitted a 20mm batten on one wall, a thickness that last night was perfectly correct. Through the night however, the wall has expanded and so the plasterboard is proud of the piece against which it is supposed to abut. I had a dsperate hunt around in the shed and in the end came across a length of 10mm hardboard from when we did the roof here in 2009. That needed drilling, shaping and fixing to the wall instead of the 20mm batten.
After lunch, during which I treated myself to yet another electric coffee, I fitted the plasterboarding to the walls. It’s screwed at one end to the battens and at the other end (ap against the window) it’s been “dot-and-dabbed”. I managed to find my plasterboarding cement after all. The glued ends are wedged up to the walls with counter-battens which will give it an “incentive” to stick. It needs to stick well because it’s going to have tiles fastened to it and “dot-and-dab” isn’t the strongest method of fastening it.
Still plenty of time left and so I’ve been fitting the roof rails for the suspended ceiling. I’ve even put an extra longitudinal support in pace because, even though it’s only lightweight tongue-and-grooving that I’ll be using, a span of 1450mm is too long, especially in humid conditions, and the ceiling might warp.
And tomorrow? I really WILL start on this door frame. I promise.
