…as you can see, and we now have the tractor on it. All of the lights now work (with a little manipulation) and we are quite proud of what we have done – and rightly so.
But we’ve hit a major snag with it.
The trailer weighs in at 740kg which is fine. It needs to be less than 750kg for taxation purposes. Its carrying capacity is rated at 888kg and Terry’s tractor weighs in at about 1 tonne (1000kg) but that’s not much of an issue as it’s much stronger how we’ve done it and it’ll take much more weight.
But it’s the broyer that’s causing up the problem. It’s far too heavy – Terry reckons that it’s about 300kg and he could well be right, and I didn’t plan on all of this weight. It’s pretty difficult to take it off and more difficult to put it back on. And it’s much more difficult to put it inside the van too without a major and drastic rethink.
The length of the combined unit of tractor and broyer too is an issue. The weight can’t be distributed correctly on the trailer and even with reversing it on and pushing the broyer as close as we can to the back door of the van there’s still too much weight at the rear end of the trailer.
Then of course all of this is impacting on the trailer tyres. They are caravan tyres and so not up to all that much. One of them doesn’t have a maker’s plate but the other one does – and it’s rated at a maximum 1016lb (475kg) and a max of 36psi. The weight of the tractor is at the limit for the tyre never mind the weight of the broyer and the weight of the trailer itself and as soon as we put the tractor and broyer on the trailer the tyre sank right down under the weight. It has about 55psi in it right now and it still doesn’t look much better.
So we are going to have a major rethink about this trailer and maybe do some more engineering. But the tyres are going to be replaced for definite with some commercial van tyres. They’ll be so much better with the weight loading and that’s always a good start.
