And it is too. This is the start of the inspection pit just outside here.metal
You can see how it’s being built. There’s the plastic lining and the breeze blocks that will be built up, with the reinforcing metalwork in the corners.
You’ll also notice the sink in the far corner. Anyone who has ever had an inspextion pit will tell you that even in the best circumstances an insection pit will be infiltrated by water and we were forever baling out the pit at Davenport Avenue in Crewe. This way, the water will sink into the sink and I can pump it out with one of those rotary pumps that you fit on an electric drill.
So Terry came round this morning and we went stright off to Montlucon and Brico Depot. A pallet of 70 breeze blocks went into the trailer, along with another 18 breeze blocks with the round corner-holes for fitting the reinforcing metalwork. 88 breeze blocks – cost €105. And isn’t that an improvement on €2.14 plus VAT of 20% per block?
Back here we unloaded the trailer. And I’ll tell you this – the Kubota is a marvellous tool for this. No messing about – we left the van and trailer at the top of the hill and ran a shuttle with the Kubota and Sankey trailer. Three trips and we had everything exactly where we wanted it. That’s better than carrying the blocks one at a time down the hill. It’s a superb little thing.
We lined the pit with the plastic and fitted the sink, and then Terry mixed the concrete while I was down in the pit tamping down the concrete and fitting the breeze blocks. And once more, the solar panels powered the little concrete mixer to perfection. It’s amazing what I can do here with my solar panels.
That took us up to 18:00 and so Terry went home and I tidied up, and emptied the beihstuhl. We’ll put some more concrete in tomorrow and then build up the walls.
However, that depends on the weather. We’re having a thunderstorm right now.
